[1] ASCE/SEI 7 (2010). Minimum design loads for buildings and other structures. Reston, Virginia, U.S., Published: American Society of Civil Engineering (ASCE).
[2] GSA (General Services Administration). (2013). Alternate path analysis and design guidelines for progressive collapse resistance. Washington, DC, Published: General Services Administration (GSA).
[3] DoD (Department of Defense). (2013). Design of buildings to resist progressive collapse, Washington, DC (2013). Published: UFC 4–023–03.
[4] Marchand KA., Stevens DJ. (2015). Progressive Collapse Criteria and Design Approaches Improvement. Journal of Performance of Constructed Facilities, 29(5):B4015004.
[5] Bao Y., Kunnath SK., El-Tawil S., Lew HS. (2008). Macromodel-based simulation of progressive collapse: RC frame structures. Journal of Structural Engineering, 134(7),1079-91.
[6] Rashidian O., Abbasnia R., Ahmadi R., Nav FM. (2016). Progressive Collapse of Exterior Reinforced Concrete Beam–Column Sub-assemblages: Considering the Effects of a Transverse Frame. International Journal of Concrete Structures and Materials, 10(4):479-97.
[7] Altoonash, A. (2004). Simulation and damage models for performance assessment of reinforced concrete beam–column joints. Ph.D. Dissertation, Stanford University, Stanford, CA.
[8] Livingston E., Sasani M., Bazan M., Sagiroglu S. (2015). Progressive collapse resistance of RC beams. Engineering Structures, 95,61-70.
[9] Karimiyan S., Moghadam AS., Kashan AH., Karimiyan M. (2015). Progressive collapse evaluation of RC symmetric and asymmetric mid-rise and tall buildings under earthquake loads. International Journal of Civil Engineering, 13(1 A),30-44.
[10] Rahai A., Asghshahr MS., Banazedeh M., Kazem H. (2013). Progressive collapse assessment of RC structures under instantaneous and gradual removal of columns. Advances in Structural Engineering, 16(10),1671-82.
[11] Naji, A., Irani, F. (2012). progressive collapse analysis of steel frames: simplified procedure and explicit expression for dynamic increase factor. International Journal of Steel Structures, 12(4),537-549.
[12] Lee, C., Kim, S., Han, K. and Lee, K. (2009). Simplified nonlinear progressive collapse analysis of welded steel moment frames. Journal of Constructional Steel Research, 65, 1130-37.
[13] OpenSees. (2016). Open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center (PEER), University of California, Berkeley, CA.
[14] OpenSees Wiki, (2006). Fiber Section. [online] Available at: http://opensees.berkeley.edu/wiki/index.php/Fiber_Section [Accessed 23 January 2014].
[15] Bazan ML. (2008). Response of reinforced concrete elements and structures following loss of load bearing elements. Ph.D. Dissertation, Northeastern University Boston (MA).
[16] Scott, BD., Park, R. and Priestley MJN. (1982). Stress–strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Struct. J., 79(1), 13–27.
[17] OpenSees Wiki, (2006). Concrete01 Material. [online] Available at: http://opensees.berkeley.edu/wiki/index.php/Concrete01_Material_--_Zero_Tensile_Strength [Accessed 17 February 2014].
[18] OpenSees Wiki, (2006). Reinforcing Steel Material. [online] Available at: http://opensees.berkeley.edu/wiki/index.php/Reinforcing_Steel_Material [Accessed 16 June 2010].
[19] Sasani,M., Kazemi, A., Sagiroglu, S. and Forest, S. (2011). Progressive Collapse Resistance of an Actual 11-Story Structure Subjected to Severe Initial Damage. Journal of Structural Engineering, 137(9), 893-902.
[20 Kazemi-Moghaddam, A. and Sasani, M. (2015). Progressive collapse evaluation of Murrah Federal Building following sudden loss of column G20. Engineering Structures, 89, 162-171.
[21] Scott, MH., and Fenves, G. (2010). Krylov Subspace Accelerated Newton Algorithm: Application to Dynamic Progressive Collapse Simulation of Frames. Journal of Structural Engineering, 136(5), 473-480.
[22] Kazemi A., Sasani M. (2011). Progressive Collapse Analysis of RC Structures Including Beam Axial Deformation. In: Structures Congress, Las Vegas: ASCE, 3132-3140.
[23] Ghahremannejad M., Park Y. (2016). Impact on the number of floors of a reinforced concrete building subjected to sudden column removal. Engineering Structures, 111,11-23.
[24] Marjanishvili S., Agnew E. (2006). Comparison of various procedures for progressive collapse analysis. Journal of Performance of Constructed Facilities. 20(4),365-74.
[25] Kordbagh B., Mohammadi M. (2017). Influence of seismicity level and height of the building on progressive collapse resistance of steel frames. The Structural Design of Tall and Special Buildings. [online] 26(2), e1305. Available at: http://onlinelibrary.wiley.com/doi/10.1002/tal.1305/full [Accessed 14. Aug. 2016].
[26] Khandelwal K., El-Tawil S. (2011). Pushdown resistance as a measure of robustness in progressive collapse analysis. Engineering Structures, 33(9), 2653-61.
[27] Asghshahr MS. (2012). Evaluation of progressive collapse in reinforced concrete structures with moment frames by considering of weak ductility. M.S. thesis, Amirkabir University of Technology.
[28] Talaat,M., Mosalam, Kh. (2009). Modeling progressive collapse in reinforced concrete buildings using direct element removal. Earthquake Engineering and Structural Dynamics, 38, 609-634.