ORIGINAL_ARTICLE
تأثیر آب مغناطیسی و پوزولانهای مختلف بر خواص بتن تازه و سخت شده خودتراکم
بتن خودتراکم، بتنی است که میتواند در فضای فشرده بین آرماتورها، بدون جداشدگی دانهها جریان یابد و تنها در اثر وزن خود متراکم گردد. هدف از این مقاله، بررسی خواص مهندسی بتن خودتراکم حاوی آب مغناطیسی با جایگزینی بخشی از سیمان مصرفی با پوزولانهای میکروسیلیس، متاکائولن، خاکستر پوسته شلتوک برنج و خاکستر بادی در نسبتهای 10 و 20 درصد وزنی مواد سیمانی میباشد. بدین منظور رفتار بتن خودتراکم در حالت تازه توسط آزمایشهای جریان اسلامپ، زمان جریان 50 سانتیمتر(T50)، زمان عبور بتن از قیف V، نسبت انسداد در جعبه Lو شاخص پایداری چشمی بررسی شده است. خواص بتن سخت شده خودتراکم با تعیین مقاومتهای فشاری و کششی(شکافت نمونه استوانهای) در سنین 7 و 28 روز و مشخصه دوام نمونههای بتنی با انجام آزمایش درصد جذب آب در سن 28 روز مورد ارزیابی قرار گرفته است. همچنین به منظور تأثیر آب مغناطیسی با شدت میدان 8/0 تسلا در نتایج، نمونههایی با آب معمولی نیز ساخته شده است. نتایج به دست آمده از بتن تازه در آزمایشگاه نشان میدهد که آب مغناطیسی و پوزولانهای مورد استفاده، موجب بهبود شرایط خودتراکمی بتن از لحاظ جریانپذیری و ویسکوزیته میشوند. بر این اساس، آب مغناطیسی میتواند میزان مورد نیاز کاهنده شدید آب برای بتن خودتراکم را با حفظ جریان اسلامپ، تا 45 درصد کاهش دهد. نتایج بتن سخت شده نیز حاکی از بهبود خواص مقاومتی و پایایی بتن خودتراکم حاوی آب مغناطیسی و پوزولانهای مصرفی میباشد. بر این اساس، میتوان اختلاط حاوی آب مغناطیسی و جایگزینی 20 درصد میکروسیلیس را با افزایش 48 و 35 درصد به ترتیب در مقاومت فشاری و مقاومت کششی و کاهش 55 درصد در میزان جذب آب در سن 28 روزه، به عنوان طرح بهینه انتخاب کرد.
https://www.jsce.ir/article_46008_d30cf4b9867e896cd999abcd6cf43dcc.pdf
2018-06-19
5
19
10.22065/jsce.2017.77396.1073
آب مغناطیسی
بتن خودتراکم
پوزولان میکروسیلیس
متاکائولن
خاکستر پوسته شلتوک برنج
خاکستر بادی
مجید
قلهکی
mgholhaki@semnan.ac.ir
1
دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
LEAD_AUTHOR
علی
خیرالدین
kheyroddin@semnan.ac.ir
2
استاد، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
محمد
حج فروش
mohammad_hajforoush@yahoo.com
3
دانشجوی دوره دکتری مهندسی سازه، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
[1] Okamura, H., Ouchi, M., (2003), “Self-Compacting Concrete”, Journal of Advanced Concrete Technology, Vol. 1, No. 1, pp. 5-15.
1
[2] Okamura, H., (1997), “Self-compacting high performance concrete”, Concr Int, 19(7), pp. 50-54.
2
[3]. “Self Consolidating Concrete”, (April 2007), Reported by ACI Committee237.
3
[4] De Schutter, G., peter, J., Bartos, M., Domone, p., Gibbs, J., (2008), “Self-Compacting Concrete”, Whittles publishing.
4
[5] Joshi, K.M., Kamat, P.V., (1996), “Effect of magnetic field on the physical properties of water”, J. Ind. Chem. Soc, 620-622.
5
[6] Lungader, M., (1995), “Influence of magnetic field on the precipitation of some inorganic salts”, J. Cryst. Growth, 152, 94–100.
6
[7] Gabrielli, C., Jaouhari, R., Maurin, G. and Keddam, M., (2001), “Magnetic Water Treatment for Scale Prevention”, Wat. Res, Vol.35, No.13, pp.3248-3259.
7
[8] Kronenberg, K., and Klaus, J., (1985), “Experimental Evidence for Effects of Magnetic Fields on Moving Water”, J. Of Trans. On Mag, Vol 21, No. 5.
8
[9] Saddam, M. A., (2009), “Effect of Magnetic Water on Engineering Properties of Concrete”, Al-Rafidain Engineering, Vol.17 No.1.
9
[10] Fu, W., Wang, Z. B., (1994), “The new technology of concrete engineering. Beijing”, The Publishing House of Chinese Architectural Industry, 56–59.
10
[11] Chau, Z. J., (1996), “The new construction method of concrete. Beijing”, The Publishing House of Chinese Architectural Industry, 401–407.
11
[12] Tawfic, Y. R., Abdelmoez, W., (2013), “The Influence of Water Magnetization on fresh and hardened concrete properties”, International Journal of Civil Engineering and Technology (IJCIET), 4(6), 21-43.
12
[13] Afshin, H., Gholizadeh, M., Khorshidi, N., (2010), “Improving Mechanical Properties of High Strength Concrete by Magnetic Water Technology”, Scientia Iranica, (ISI), 17(1), 74-79.
13
[14] Su, N., Yeong Hwa Wu., Yo Mar, Ch., (2000), “Effect of Magnetic Water on The Engineering Properties of Concrete Containing Granulated Blast Furnace Slag”, J. of Cement and Concrete Research, 30, 599 – 605.
14
[15] Su, N., Yeong Hwa, Wu., Yo Mar, Ch., (2003), “Effect of Magnetic Field Treated Water on Mortar and Concrete Containing Fly Ash”, Cement and Concrete Composites, Volume 25, Issue 7, 681-688.
15
[16] Abavisani, I., Rezaifar, O., Kheyroddin, A., (2017), “Alternating Magnetic Field Effect on Fine-aggregate Concrete Compressive Strength”, Constr Build Mater, 134, 83–90.
16
[17] Abavisani, I., Rezaifar, O., Kheyroddin, A., (2017), “Magneto-Electric Control of Scaled-Down Reinforced Concrete Beams”, ACI Structural Journal, V. 114, No. 1-6.
17
[18] Oner, A., Akyuz, S., (2007), “An experimental study on optimum usage of GGBS for the compressive strength of concrete”. Cement Concr Compos, 29(6), 505–14.
18
[19] Yang, E.H., Yang, Y.Z., Li, V.C., (2007), “Use of high volumes of fly ash to improve ECC mechanical properties and material greenness”, ACI Mater J 104(6), 620–8.
19
[20] “The European guidelines for self-compacting concrete; specification production and use”, (May 2005), EFNARC.
20
[21] Gesoglu, M., Guneyisi, E., Ozbay, E., (2009), “Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume”, Constr Build Mater, 23, 1847–54.
21
[22] Elahi, A., Basheer, P.A.M., Nanukuttan, S. V., Khan, Q.U.Z., (2010), “Mechanical and durability properties of high performance concretes containing supplementary cementitious materials”, Constr Build Mater, 24, 292–9.
22
[23] Maghsoudi, A. A., Soheil, M. J., Darbhenz, A., (2010), “Effect of the Nano Particles in the New Generation of Concretes, SCC”, Int. J. Nanosci. Nanotechnol., Vol. 6, No. 3, pp. 137-143.
23
[24] Jalal, M., Mansouri, E., Sharifipour, M., Pouladkhan, AR., (2012), “Mechanical, rheological, durabilityand microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles”, Materials and Design, 34, 389–400.
24
[25]Sabet, F., Libre, N. A., Shekarchi, M., (2013),“Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash”, Constr Build Mater, 44, 175–184.
25
[26] Guneyisi, E., Gesoglu, M., Ozbay, E., (2009), “Evaluating and forecasting the initial and final setting times of self-compacting concretes containing mineral admixtures by neural network”, Mater Struct, 42, 469–84.
26
[27] Sahmaran, M., Yaman, I.O., Tokyay, M., (2009), “Transport and mechanical properties of self consolidating concrete with high volume fly ash”, Cem Concr Compos, 31, 99–106.
27
[28] Khatib, J.M., (2008), “Performance of self-compacting concrete containing fly ash”, Constr Build Mater, 22, 1963–71.
28
[29] Jalal, M., Ramezanianpour, A.A., khazaei pool M., (2013), “Split tensile strength of binary blended Self- compacting concrete containing low volume fly ash and Tio2 nanoparticles”, Composites Engineering, 55, 324-37.
29
[30] Poon, C.S., Lam, L., Kou, S.C., Wong, Y.L., Wong, R., (2001), “Rate of pozzolanic reaction of metakaolin in high-performance cement pastes”, Cem Concr Res, 31, 1301–6.
30
[31] Hassan, A.A.A., Lachemi, M., Hossain, K.M.A., (2012), “Effect of Metakaolin and silica fume on the durability of self- consolidating concrete”, Cement and concrete composites, 34, 801-7.
31
[32]Madandoust, R., Ranjbar, M. M., Ahmadi Moghadam, H., Mousavi, S. Y., (2011), “Mechanical properties and durability assessment of rice husk ash concrete”, Biosystems Engineering, 110, 144-152.
32
[33] Khayat, K.H., Bickley, J., Lessard, M., (2000), “Performance of self-consolidating concrete for casting basement and foundation walls”, ACI Material Journal, 97, 374–380.
33
[34]Madandoust, R., Mousavi, S. Y., (2012), “Fresh and hardened properties of self-compacting concrete containing metakaolin”,Constr Build Mater, 35, 752–760.
34
[35]Safiuddin, M.d., West, J.S., Soudki, K.A., (2010), “Flowing ability of self-consolidating concrete and its binder paste and mortar components incorporating rice husk ash”, Canadian Journal of Civil Engineering, 37, 401-12.
35
[36]Libre, N. A., Khoshnazar, R., Shekarchi, M., (2010), “Relationship between fluidity and stability of self-consolidating mortar incorporating chemical and mineral admixtures”, Constr Build Mater, 24(7), 1262–71.
36
[37] ACI Committee 318, (2005), “Building Code Requirements for Reinforced Concrete (ACI 318–05) and Commentary (318R–05)”, American Concrete Institute, Farmington Hills.
37
[38] CEB-FIP, Diagnosis and assessment of concrete structures, (1989), “state of the art report”, CEB Bull 192, 83–85.
38
[39] Domone, P.L., (1997), “A review of the hardened mechanical properties of self-compacting concrete”, Cement and concrete composites, 29, 1–12.
39
ORIGINAL_ARTICLE
پیش بینی مقاومت پیچشی تیرهای بتن آرمه تقویت شده با FRP با استفاده از شبکه های عصبی مصنوعی
اعضای سازه ای بتن آرمه نظیر تیرهای پیرامونی، تیرهای حلقوی در پایین دال دایروی، تیرهای نگهدارنده سایبان و سایر انواع تیرها تحت بارگذاری پیچشی قرار می گیرند. مقاوم سازی چنین تیرهایی به ویژه در شرایطی که بارهای سرویس افزایش می یابند و یا ظرفیت سازه ای در اثر گذشت زمان تقلیل می یابد و همچنین شرایطی که به روزرسانی ضوابط آیین نامه ای انجام میشود، ضروری به نظر می رسد. تقویت تیرهای بتن آرمه تحت پیچش توسط صفحات FRP یکی از مدرن ترین تکنیک های موجود در صنعت ساختمان می باشد. مقام سازی سازه ها به کمک FRP باعث افزایش در ظرفیت خمشی، برشی و پیچشی و همچنین سبب تغییر در مود شکست و صفحه شکست می گردد. در این مقاله، پیش بینی مقاومت پیچشی تیرهای بتن آرمه تقویت شده با FRP به کمک شبکه های عصبی مصنوعی مورد بررسی قرار گرفته است. پارامترهای ورودی شبکه عصبی شامل عرض تیر بتن آرمه، ارتفاع تیر، ضخامت ورق FRP، مدول الاستیسیته ورق FRP، تنش تسلیم میلگردهای طولی و عرضی، مقاومت فشاری بتن، عرض موثر نوار تقویت برشی در راستای طول تیر، فاصله مرکز تا مرکز رکابی FRP، زاویه دورپیچ ورقه FRP و تعداد دورپیچ های FRP در نظر گرفته شدند. پارامتر هدف، لنگر پیچشی قابل تحمل توسط تیر می باشد. نتایج تحقیق نشان می دهد شبکه عصبی مصنوعی بهینه با تعداد مشخص نورون در لایه پنهان، با دقت مناسبی می تواند مقاومت پیچشی تیرهای بتن آرمه تقویت شده با FRP را تخمین بزند و از این جهت، می تواند جایگزین مناسبی برای روش های زمان بر و پرهزینه آزمایشگاهی باشد.
https://www.jsce.ir/article_44714_957d4126f7b7536c4a6c06ecdfcf076d.pdf
2018-05-22
20
35
10.22065/jsce.2017.70668.1023
تیر بتن آرمه
مقاومت پیچشی
FRP
شبکه عصبی مصنوعی
پیچش
حسین
نادرپور
naderpour@semnan.ac.ir
1
دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
LEAD_AUTHOR
پویان
فخاریان
pouyanfakharian@gmail.com
2
دانشجوی دکتری مهندسی عمران، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
[1] A. Ghobarah, M.N. Ghorbel, S.E. Chidiac, Upgrading Torsional Resistance of Reinforced Concrete Beams Using Fiber-Reinforced Polymer, J Compos Constr. 6 (2002) 257–263. doi:10.1061/(ASCE)1090-0268(2002)6:4(257).
1
[2] S. Panchacharam, A. Belarbi, Torsional Behavior of Reinforced Concrete Beams Strengthened with FRP Composites, First FIB Congr. (2002) 1–11. http://rb2c.mst.edu/media/research/rb2c/documents/torsional.pdf.
2
[3] M. Ameli, H.R. Ronagh, P.F. Dux, Experimental investigations on FRP strengthening of beams in torsion, in: FRP Compos Civ Eng 2004, AA Balkema, 2005: pp. 587–592.
3
[4] A.K.Y. Hii, R. Al-Mahaidi, Experimental Investigation on Torsional Behavior of Solid and Box-Section RC Beams Strengthened with CFRP Using Photogrammetry, J Compos Constr. 10 (2006) 321–329. doi:10.1061/(ASCE)1090-0268(2006)10:4(321).
4
[5] M.R. Mohammadizadeh, M.J. Fadaee, H.R. Ronagh, Improving torsional behaviour of reinforced concrete beams strengthened with carbon fibre reinforced polymer composite, Iran Polym J. 18 (2009) 315–327.
5
[6] M.H. Arslan, Predicting of torsional strength of RC beams by using different artificial neural network algorithms and building codes, Adv Eng Softw. 41 (2010) 946–955. doi:10.1016/j.advengsoft.2010.05.009.
6
[7] A. Deifalla, A. Ghobarah, Strengthening RC T-Beams Subjected to Combined Torsion and Shear Using FRP Fabrics: Experimental Study, J Compos Constr. 14 (2010) 301–311. doi:10.1061/(ASCE)CC.1943-5614.0000091.
7
[8] A.S. Mahmood, M.N. Mahmood, Torsional Behavior of Prestressed Concrete Beams Strengthened, (2011).
8
[9] C. Tudu, Study of Torsional Behaviour of Rectangular Reinforced Concrete Beams Study of Torsional Behaviour of Rectangular Reinforced Concrete Beams, 2012.
9
[10] V.H. Jariwala, P. V. Patel, S.P. Purohit, Strengthening of RC Beams Subjected to Combined Torsion and Bending with GFRP Composites, Procedia Eng. 51 (2013) 282–289. doi:10.1016/j.proeng.2013.01.038.
10
[11] R. Rafeeq, Torsional Strengthening of Reinforced Concrete Beams Using CFRP Composites, Portland State University, 2016. doi:10.15760/etd.3121.
11
[12] G.C. Behera, T.D.G. Rao, C.B.K. Rao, Torsional behaviour of reinforced concrete beams with ferrocement U-jacketing—Experimental study, Case Stud Constr Mater. 4 (2016) 15–31. doi:10.1016/j.cscm.2015.10.003.
12
[13] S.K. Elwan, Torsion strengthening of RC beams using CFRP (parametric study), KSCE J Civ Eng. 0 (2016) 1–9. doi:10.1007/s12205-016-0156-7.
13
[14] H. Naderpour, A. Kheyroddin, G.G. Amiri, Prediction of FRP-confined compressive strength of concrete using artificial neural networks, Compos Struct. 92 (2010) 2817–2829. doi:10.1016/j.compstruct.2010.04.008.
14
[15] M. Ahmadi, H. Naderpour, A. Kheyroddin, Utilization of artificial neural networks to prediction of the capacity of CCFT short columns subject to short term axial load, Arch Civ Mech Eng. 14 (2014) 510–517. doi:10.1016/j.acme.2014.01.006.
15
[16] A. Kheyroddin, H. Naderpour, M. Ahmadi, Compressive Strength of Confined Concrete in CCFST Columns, J Rehabil Civ Eng. 2 (2014) 71–80.
16
[17] H. Naderpour, A. Kheyroddin, G. Ghodrati Amiri, S.R. Hoseini Vaez, Estimating the behavior of FRP-strengthened RC structural members using artificial neural networks, Procedia Eng. 14 (2011) 3183–3190. doi:10.1016/j.proeng.2011.07.402.
17
[18] D. Rezazadeh Eidgahee, F. Fasihi, H. Naderpour, Optimized Artificial Neural Network for Analyzing Soil-Waste Rubber Shred Mixtures, Sharif J Civ Eng. 31.2 (2015) 105–111.
18
[19] G. Shafabakhsh, H. Naderpour, F. Fasihi, Optimized ANN Algorithm for Analyzing the Road Flexible Pavements, Ournal Model Eng. 8 (2010) 45–56. doi:10.22075/JME.2017.1559.
19
[20] H. Naderpour, H. Vosoughifar, E. Ghobakhloo, Evaluation of Effective Parameters on Wave Diffraction of Far-Fault Ground Motions Using Artificial Neural Networks, Sharif J Civ Eng. 32.2 (2016) 13–23. http://journal.sharif.ir/journals/sjce/article_981_104.html.
20
[21] G. Shafabakhsh, H. Naderpour, R. Noroozi, Optimized ANN Algorithm for Analyzing the Road Rigid Pavements, Q J Transp Eng. 3 (2011) 43–54.
21
[22] H. Naderpour, P. Fakharian, F. Hosseini, Prediction of Behavior of FRP-Confined Circular Reinforced Concrete Columns using Artificial Neural Network, in: 8th Natl Conf Concr, Tehran, Iran, 2016. doi:10.13140/RG.2.2.11714.58568.
22
[23] H. Naderpour, S.A. Alavi, A proposed model to estimate shear contribution of FRP in strengthened RC beams in terms of Adaptive Neuro-Fuzzy Inference System, Compos Struct. 170 (2017) 215–227. doi:10.1016/j.compstruct.2017.03.028.
23
[24] S. Hosseini Vaez, H. Naderpour, M. Barati, Estimating the behavior of RC beams strengthened with NSM system using artificial neural networks, J Struct Constr Eng. 4 (2017) 16–28. doi:10.22065/jsce.2017.44332.
24
[25] C.E. Chalioris, Analytical model for the torsional behaviour of reinforced concrete beams retrofitted with FRP materials, Eng Struct. 29 (2007) 3263–3276. doi:10.1016/j.engstruct.2007.09.009.
25
[26] State Planning Organization and Management, Design guidelines and customer agreement executive improvement of existing concrete structures using reinforced materials FRP (Publication 345), (2006).
26
[27] M. Ameli, H.R. Ronagh, P.F. Dux, Behavior of FRP Strengthened Reinforced Concrete Beams under Torsion, J Compos Constr. 11 (2007) 192–200. doi:10.1061/(ASCE)1090-0268(2007)11:2(192).
27
[28] H. Zhang, J. W., Lu, Z. T. Zhu, Experimental study on the behaviour of RC torsional members externally bonded with CFRP, in: 2001.
28
[29] A.K.Y. Hii, R. Al-Mahaidi, Torsional Capacity of CFRP Strengthened Reinforced Concrete Beams, J Compos Constr. 11 (2007) 71–80. doi:10.1061/(ASCE)1090-0268(2007)11:1(71).
29
[30] C.E. Chalioris, Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers – Experimental study, Constr Build Mater. 22 (2008) 21–29. doi:10.1016/j.conbuildmat.2006.09.003.
30
[31] M.R. Mohammadizadeh, M.J. Fadaee, H.R. Ronagh, A. Ahmadinezhad, Behavior of high-strength concrete beams strengthened with CFRP sheets in torsion, (2008) 22–24.
31
[32] M.R. Mohammadizadeh, M.J. Fadaee, Torsional Behaviour of High-Strength Concrete Beams Strengthened Using CFRP Sheets ; an Experimental and Analytical Study, 16 (2009).
32
[33] S. Ma, N.M. Bunnori, K.K. Choong, Evaluation of Ultimate Strength of Reinforced Concrete Beams Strengthened with FRP Sheets under Torsion, MATEC Web Conf. 47 (2016) 2006. doi:10.1051/matecconf/20164702006.
33
[34] B. Peter, T.B. Edil, DESIGN OF HIGHWAY EMBANKMENTS USING TIRE CHIPS By Peter, 123 (1997) 295–304.
34
[35] L. Milne, Feature selection using neural networks with contribution measures, in: Aust Conf Artif Intell AI’95, Citeseer, 1995: pp. 1–8.
35
ORIGINAL_ARTICLE
ارزیابی احتمالاتی آسیب پذیری لرزه ای پل های چند دهانه در شمال ایران
پل ها در خطوط ارتباطی از اهمیت ویژه ای برخوردار هستند. بدین خاطر باید پیش از وقوع زلزله در امر ارزیابی آسیب پذیری اقدامات لازم را مبذول داشت. منحنی های شکنندگی یک وسیله تصمیم گیری برای ارزیابیخطر لرزه ای می باشد. هدف از این مطالعه، استفاده از یک روش تحلیلی برای تولید منحنی های شکنندگی برای پل های جاده ای در استان مازندران می باشد. از آن جا که این منحنی ها برای برنامه ریزی های پیش و پس از زلزله استفاده می شود، به منظور افزایش قابلیت اطمینان آن ها در این مطالعه سعی شده از دقیق ترین روش های تحلیلی (آنالیز تاریخچه زمانی غیرخطی) و معتبرترین فرضیات مدلسازی استفاده شود. با توجه به ویژگی های خاص زلزله های دور از گسل در این تحقیق اثرات این گونه زلزله ها روی پل ها، بررسی شده است. با توجه به هندسه پل ها برای آنالیز دقیق، پل های مورد مطالعه تحت اثر 100 جفت رکورد زلزله در جهت متعامد قرار گرفت و منحنی های شکنندگی آن ها ترسیم و مقایسه گردید. با نگاهی کلی به نتایج مشاهده می شود که تغییر قطر ستون های پل چه میزان بر منحنی های شکنندگی تأثیر می گذارند. یکی از ساده سازی های رایج در مدلسازی حذف اثر کوله و پی با گیردار کردن پی کوله و پای ستون در مدلسازی می باشد. می توان مشاهده کرد که با حذف این اثر و مقایسه آن با حالت گیردار نشده، میانه شکنندگی افزایش یافته و در واقع احتمال آسیب پذیری کاهش می یابد. پس از انجام تحلیل تاریخچه زمانی مشاهده شد که با کاهش قطر ستون ها در جهت طولی و عرضی جابجایی نسبی ستون ها (دریفت) افزایش می یابد.
https://www.jsce.ir/article_46674_f6c8a24c5ec0d06ec2b42550cb9cd1d5.pdf
2018-06-20
36
54
10.22065/jsce.2017.68948.1009
زلزله های دور از گسل
ارزیابی خسارت لرزه ای
آسیب پذیری پل
منحنی شکنندگی
تحلیل دینامیکی غیر خطی
علیرضا
میرزا گل تبار روشن
ar-goltabar@nit.ac.ir
1
دانشیار، دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
LEAD_AUTHOR
علی
ناصری
eng_alinaseri@yahoo.com
2
دانشجوی دکتری مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
AUTHOR
یاسر
محمودی پاتی
y.mahmoodi1370@gmail.com
3
کارشناس ارشد مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، ایران
AUTHOR
[1] DesRoches, R., Comerio, M., Eberhard, M., Mooney, W., and Rix, G. J (2011) "Overview of the 1 Haiti Earthquake " Earthquake Spectra,27 (S1), S1-S21.
1
[2] Anagnos, T ; Rojahn, C and Kiremidjian, “A,S ,NCEER-ATC Joint Study on Fragility of Buildings”, National Center for Earthquake Engineering Research (NCEER) 1995.
2
[3] Mackie K. and Stojadinovic B. (2001) "Probabilistic Seismic Demand Model for California Bridges", Journal of Bridge Engineering, Vol. 6(6) ,pp.468-480.
3
[4]"Choi E., DesRoches R., Nielson B. (2004) "Seismic fragility of typical bridges in moderate seismic zones". Engineering Structures, Vol. 26, pp. 187–199.
4
[5]Shinozuka, M. “Statistical Analysis Of Bridge Fragility Curve ", proceeding of the workshop on effective Systems for Bridge, New York, NY.1998.
5
[6]Nielson, B. (2005). “Analytical Fragility Curves for Highway Bridges in Moderate Seismic Zones,” PhD thesis, Georgia Institute of Technology.
6
[7]Padgett J.E. “Seismic vulnerability assessment of retrofitted bridges using probabilistic methods.” Ph.D. thesis, Georgia Institute of Technology, Atlanta, 2007.
7
[8]Nielson B.G. and DesRoches R. “Analytical seismic fragility curves for typical bridges in the Central and Southeastern United States.” Journal of Earthquake Spectra, 2007; 23(3), 615-633.
8
[9]Wang Q., ziyan, w., (2012). “Seismic fragility analysis of haighway bridges considering multi-dimensional performance limit states.” Earthq Eng & Eng Vib (2012) 11: 185-193
9
[10]Tavares, D., Padgett, J., (2012). “Fragility curves of typical as-built highway bridges in eastern Canada”, Engineering Structures 40 (2012) 107–118
10
[11]Mazzoni, S; McKenna, F; Scott, M H; Fenves, G L; & Jeremic B; “Opensees Command Language Manual 2007.
11
[12]Mander J. B., Priestley M. J. N., Park R. (1988) "Observed Stress-Strain Behavior of Confined Concrete", Journal of Structural Engineering, Vol. 114(8), pp. 1827–1849.".
12
[13] حسین پهلوان، " ارزیابی آسیب پذیری احتمالاتی . مقاوم سازی پل های بتن آرمه با نرم افزار OpenSEES "، انتشارات آزاده، چاپ اول، زمستان 1394.
13
[14]http://opensees.berkeley.edu/wiki/index.php/Reinforcing_Steel_Material.
14
[15]Aviram A., Mackie K. and Stojadinovic B. (2008) "Guidelines for Nonlinear Analysis of Bridge Structures in California", Technical Report, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
15
[16]Shamsabadi, A., & Yan, L. (2008). Closed-form force-displacement backbone curves for bridge abutment-backfill systems. In Geotechnical Earthquake Engineering and Soil Dynamics IV pp. 1-10.
16
[17]Megally, S. H., Silva, P. F., & Seible, F. (2002). SEISMIC RESPONSE OF SACRIFICIAL SHEAR KEYS IN BRIDGE ABUTMENTS (No. SSRP-2001/23)".
17
[18]Ramanathan, K. N. (2012). Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy. PhD thesis, Georgia Institute of Technology, Atlanta".
18
[19]http://peer.berkeley.edu/ pacific earthquake engineering research center". ".
19
[20]FEMA P695 (2009). Quantification of building seismic performance factors,” Rep. FEMA P695, Federal Emergency Management Agency, Washington, D.C.".
20
[21]Maleki S. Bisadi V . (2006) "Orthogonal Effects in Seismic Analysis of Skewed Bridges", ASCE Journal of Bridge Engineering, Vol. 11, No. 1, pp. 122- 130.
21
[22]Shinozuka M., Feng Maria Q., Kim H. K., and Kim S. H. (2000) "Nonlinear Static Procedure for Fragility Curve Development", Journal of Engineering Mechanics, Vol. 126(12), pp. 1287–1296.
22
[23]Abbasi, M., Zakeri, B., & Amiri, G. G. (2015). Probabilistic seismic assessment of multiframe concrete box-girder bridges with unequal-height piers. Journal of Performance of Constructed Facilities, 30(2), 04015016.
23
[24]Jeon, J. S., Shafieezadeh, A., Lee, D. H., Choi, E., & DesRoches, R. (2015). Damage assessment of older highway bridges subjected to three-dimensional ground motions: characterization of shear–axial force interaction on seismic fragilities. Engineering Structures, 87, 47-57.
24
[25]Jeon, J. S., DesRoches, R., Kim, T., & Choi, E. (2016). Geometric parameters affecting seismic fragilities of curved multi-frame concrete box-girder bridges with integral abutments. Engineering Structures, 122, 121-143.
25
[26]Siqueira, G. H., Sanda, A. S., Paultre, P., & Padgett, J. E. (2014). Fragility curves for isolated bridges in eastern Canada using experimental results. Engineering Structures, 74, 311-324.
26
[27]Ramanathan, K., DesRoches, R., & Padgett, J. E. (2012). A comparison of pre-and post-seismic design considerations in moderate seismic zones through the fragility assessment of multispan bridge classes. Engineering Structures, 45, 559-573.
27
ORIGINAL_ARTICLE
ارزیابی رفتار سیستم توام قاب خمشی و دیوار برشی بتنی نیمه مدفون تحت اثر بارگذاری انفجاری
امروزه با گسترش حملات تروریستی به ساختمانها در جهان، بررسی دقیق رفتار سازهها تحت بارهای انفجاری یک ضرورت محسوب میشود. فشار ناشی از انفجار یکی از مخرب ترین بارهایی است که سازه ممکن است تجربه کند. با توجه به اینکه سازههای موجود به طور معمول بر اساس بارهای ثقلی و لرزهای متعارف مورد طراحی قرار گرفتهاند، نیاز است عملکرد این سازهها تحت بارهای ناشی از انفجار مورد بررسی قرار گیرد. در این مقاله مطالعات عددی بر روی مدلهای سازهای 2 بعدی با تعداد طبقات 2 و 5 دارای سیستم توام قاب خمشی و دیوار برشی بتنی نیمه مدفون صورت گرفته است. سازههای مورد بررسی بر اساس دستورالعمل UFC 3-340-02 برای انفجار 1000 کیلوگرم TNT در فاصله 20 متری، در نرم افزار SAP 2000 طراحی و مورد تحلیل دینامیکی غیر خطی قرار گرفتهاند. به منظور بارگذاری، مقادیر فشار مبنای انفجار حاصل از موج انفجار، بازتاب موج انفجار و فشارهای ناشی از آن محاسبه و همچنین پارامترهای موج انفجار در هوا شامل سرعت جبهه موج، زمان تناوب و طول موج انفجار نیز تعیین میگردد و نمودار فشار – زمان ناشی از انفجار ارائه میگردد. پس از آنالیز، مقادیر دوران مفاصل پلاستیک، نسبت شکلپذیری و بیشترین نیروی محوری، نیروی برشی و لنگر خمشی بوجود آمده در اعضا، همچنین بیشینه جابجایی، سرعت و شتاب مطلق تراز طبقه بام برای کلیه مدلها مورد بررسی و مقایسه قرار می گیرد.
https://www.jsce.ir/article_46851_1f4b7e343e1b468c2d2f731cb09c6903.pdf
2018-06-20
55
70
10.22065/jsce.2017.83948.1162
انفجار
سازه بتنی
دیوار برشی بتنی
قاب خمشی
نیمه مدفون
پویا
حسنوند
pouya.hassanvand@yahoo.com
1
کارشناس ارشد مهندسی سازههای امن، مجتمع دانشگاهی آمایش و پدافند غیرعامل، دانشگاه صنعتی مالک اشتر، تهران، ایران
AUTHOR
مجتبی
حسینی
mo-hosseini78@yahoo.com
2
دانشیار، دانشکده فنی و مهندسی، دانشگاه لرستان، لرستان، ایران
AUTHOR
عبدالزضا
سروقد مقدم
moghadam.research@gmail.com
3
دانشیار، پژوهشگاه بینالمللی زلزله شناسی و مهندسی زلزله، تهران، ایران
LEAD_AUTHOR
محمد حیدری
رسول آبادی
mhman_1367@yahoo.com
4
کارشناس ارشد مهندسی سازههای امن، مجتمع دانشگاهی آمایش و پدافند غیرعامل، دانشگاه صنعتی مالک اشتر، تهران، ایران
AUTHOR
[1] Unified Facilities Criteria (UFC 3-340-02), (2008). “Structures to Resist the Effects of Accidental Explosions”; US Department of Defense, Washington DC, 5 December 2008.
1
[2] Accidental Explosions; TM 5-1300, (1990). “The Design of Structures to Resist the Effects of US Department of the Army, Navy, and Air Force”, Washington DC.
2
[3] Woodson S.C, Baylot J.T, (1999). Structural collapsequarter-scale model experiments (No. WES/TR/SL-99-8).Armyengineer waterways experiment station vicksburg ms structures lab.
3
[4] Luccioni B.M, Ambrosini R.D, Danesi R.F. (2004). Analysis of building collapse under blast loads. Engineeringstructures, 26(1), 63-71.
4
[5] BaoX, LiB, (2010).Residual strength of blast damaged reinforced concrete columns. International journal of impact engineering, 37(3), 295-308.
5
[6] Jayasooriya R, Thambiratnam D.P, Perera N. J,Kosse V, (2011). Blast and residual capacity analysis of reinforced concrete framed buildings. Engineering structures, 33(12), 3483-3495.
6
[7] FEMA426, (2003). “Reference Manual to Mitigate Potential Terrorist Attacks against Building”; Federal Emergency Management Agency, Chapter 4, page 1-20.
7
[8] FEMA427, (2003). “Primer for Design of Commercial Buildings to Mitigate Terrorist Attacks”; Federal Emergency Management Agency, Chapter 4, page 1-10.
8
[9] Bangash, N. Y. H.; Bangash, T, (2009). “Shock, Impact and Explosion”; Springer-Verlag, Berlin Heidelberg, page 388-393.
9
[10] Bangash, N. Y. H.; Bangash, T, (2006). “Explosion-ResistantBuildings”; Springer-Verlag, Berlin Heidelberg, page 67-101.
10
[11] Brode, H. L, (1955). “Numerical Solution of Spherical Blast Waves”; J. Appl. Phys. 26, 0021-8979.
11
[12] Newmark, N. M.; Hansen, R. J, (1961). “Design of Blast Resistant Structures”; Shock and Vibration Handbook, Vol. 3, Eds. Harris and Crede. McGraw-Hill, New York.
12
[13] Henrych, J, (1979). “The Dynamics of Explosion and its Use”; Elsevier Scientific Pub. Co., Vol. 1, Amsterdam.
13
[14] FEMA – 356, (2000). “PRESTANDARD AND COMMENTARY FOR THE SEISMIC REHABILITATION OF BUILDINGS”.
14
[15] National building regulations ninth topic, (2013). "Design and Construction of concrete building" Ministry of Roads & Urban Development.
15
[16] National building regulations sixth topic, (2013). "The loads on the building" Ministry of Roads & Urban Development.
16
[17] Regulations 2800, Fourth Edition, (2013).
17
[18] Instructions seismic rehabilitation of existing buildings, Publication 360, (2013).
18
[19] Detailed instructions seismic rehabilitation of existing buildings, Publication 361, (2013).
19
[20] National Building Regulations 21th topic, (2013). "Passive Defense" Ministry of Roads & Urban Development.
20
[21] Concrete Regulations Iran, (1996). "Abba".
21
[22] P. safaei, (2007). "fortified and safe structures", Malek Ashtar University Press.
22
ORIGINAL_ARTICLE
ارزیابی ضریب اصلاح طیفی برای طراحی سازههای قاب خمشی فولادی در حوزهی نزدیک به گسل
استاندارد 2800 ایران برای لحاظ آثار مخرب زلزلههای نزدیک به گسل در طراحی سازهها، مقادیر طیف طراحی را با استفاده از ضریب اصلاح طیفی (N) که وابسته به پریود ارتعاش سازه و درجهی لرزهخیزی منطقه میباشد، افزایش میدهد. در این مقاله، ضمن بررسی دقت رابطهی ارائه شده در استاندارد 2800 برای تخمین ضریب اصلاح طیفی، برآوردهایی برای این ضریب جهت لحاظ آثار مخرب زلزلههای نزدیک به گسل بر پاسخ غیرارتجاعی سازههای قاب خمشی فولادی ارائه گردیده است. برای این منظور طیف پاسخ رکوردها و نیز پاسخ لرزهای سازههای نمونه در شدتهای طیفی یکسان برای یک مجموعه از زلزلههای دور از گسل و سه مجموعه مختلف از رکوردهای نزدیک به گسل با یکدیگر مقایسه شدهاند. برای تعیین پاسخ لرزهای سازههای نمونه (شامل پنج قاب خمشی فولادی 3 تا 15 طبقه) در شدتهای لرزهای مختلف، از نتایج تحلیلهای دینامیکی افزایشی استفاده شده است. نتایج به دست آمده از این تحقیق نشان میدهد که ضریب اصلاح ارائه شده توسط استاندارد 2800 نمیتواند به طور کامل آثار زلزلههای نزدیک به گسل بر پاسخ غیرخطی سازههای قاب خمشی را پوشش دهد. این موضوع برای سازههای کوتاهتر آشکارتر است. همچنین نتایج تحلیلها نشان میدهد که رابطهی منظمی بین دورهی تناوب اصلی ارتعاش سازه و مقدار ضریب اصلاح طیفی وجود ندارد.
https://www.jsce.ir/article_46869_1ad1122edd42990daec48ca30105ced1.pdf
2018-06-20
71
87
10.22065/jsce.2017.75560.1068
اصلاح طیف طراحی
زلزلههای نزدیک به گسل
قاب خمشی فولادی
تحلیل دینامیکی افزایشی
ویرایش چهارم استاندارد 2800
رضا
وهدانی
rvahdani@semnan.ac.ir
1
استادیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
LEAD_AUTHOR
محسن
گرامی
mgerami@semnan.ac.ir
2
دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
مرتضی
راضی
morteza.razi@gmail.com
3
دانشجوی دکترای مهندسی عمران، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
[1] Building & Housing Research Center, (2015). Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800) 4th edition. Tehran.
1
[2] Somerville, PG. (2005). Engineering Characterization of near-fault ground motions. In: NZSEE Conference, Planning and Engineering for Performance in Earthquake. Taupo, New Zealand.
2
[3] Kalkan, E.; Sashi, K.; Kunnath. (2006). Effects of Fling Step and Forward Directivity on Seismic Response of Buildings. Earthquake Spectra, 22(2), 367-390.
3
[4] Gerami, M.; Siahpolo, N.; Vahdani, (2015)., Effects of higher modes and MDOF on strength reduction factor of elastoplastic structures under far and near-fault ground motions. Ain Shams Engineering Journal, In Press.
4
[5] Somerville, PG.; Smith, NF.; Graves, RW.; Abrahamson NA. (1997). Modification of empirical strong ground motion attenuation relations to include the amplitude and duration effects of rupture directivity. Seismological Research Letters, 68(1), 199–222.
5
[6] Alavi, B.; Krawinkler, H. (2001). Effects of near-fault ground motions on frame structures. Report No. 138. California: The John A. Blume Earthquake Engineering Center, Stanford University.
6
[7] Sehhati, R.; Rodriguez-Marek, A.; ElGawady, M.; William, F. (2011). Effects of near-fault ground motions and equivalent pulses on multi-story structures. Engineering Structures, 33. 767–779.
7
[8] Su, F.; Anderson, JG.; Zeng, Y. (2006). Characteristics of ground motion response spectra from recent large earthquakes and their com- parison with IEEE Standard 693. In: Proceedings of the 8th United States National Conference on Earthquake Engineering (8NCEE), San Francisco, CA.
8
[9] Gerami, M.; Abdollahzadeh, D. (2012). Estimation of forward directivity effect on design spectra in near field of fault. Journal of Basic and Applied Scientific Research, 2(1), pp. 8670–8686.
9
[10] Gillie, JM.; Rodriguez-Marek, A.; McDaniel, C. (2010). Strength reduction factors for near-fault forward-directivity ground motions. Engineering Structures, 32, 273–285.
10
[11] Soltangharaei, V.; Razi, M.; Gerami, M. (2016). Comparative Evaluation of Behavior Factor of SMRF Structures for Near and Far Fault Ground Motions. Periodica Polytechnica Civil Engineering, 60(1), 75-82.
11
[12] Iwan, WD. (1997). Drift spectrum: Measure of demand for earthquake ground motions. Journal of Structural Engineering, 123 (4), 397–404.
12
[13] Dixiong, YJP.; Gang, L. (2010). Interstory drift ratio of building structures subjected to near-fault ground motions based on generalized drift spectral analysis. Soil Dynamics and Earthquake Engineering, 30. 1182–1197.
13
[14] Ghobarah, A.; ElSheikh, AI. (2003). Response of structures to near-fault ground motion. In: 4th International Conference of Earthquake Engineering and Seismology. Tehran.
14
[15] Baker, JW. (2007). Quantitative Classification of Near-Fault Ground Motions. Bulletin of the Seismological Society of America, 97(5), 1486–1501.
15
[16] Shahi, SK.; Baker, JW. (2014). An efficient algorithm to identify strong velocity pulses in multi-component ground motions. Bulletin of the Seismological Society of America, 104(5), 2456–2466.
16
[17] Kumar, M.; Stafford, PJ.; Elghazouli, AY. (2013). Seismic shear demands in multi-storey steel frames designed to Eurocode 8. Engineering Structures, 52, 69–87.
17
[18] Rathje, EM.; Faraj, F.; Russel, S.; Bray, JD. (2004). Empirical relationships for frequency content parameters of earthquake ground motions. Earthq. Spectra, 20(1), 119–44.
18
[19] Ministry of roads and Urban Development, (213). Iranian National Building Code for Steel Structures-Part 10. Tehran.
19
[20] SeismoStruct. A computer program for static and dynamic analysis for framed structures, Version 7.0.4, Available in URL: www.seismosoft.com(online)(2015)
20
[21] Scott, MH.; Fenvese, GL. (2006). Plastic hinge integration method for force-based beam-column elements. ASCE Journal of Structural Engineering, 132(2), 244-252.
21
[22] Stewart, JP.; Chiou, SJ.; Bray, JD.; Graves, RW.; Somerville, PG.; Abrahamson, NA.( 2001). Ground Motion Evaluation Procedures for Performance-Based Design. Research Report Conducted Under Grant no.EEC-9701568 from the National Science Foundation. University of California: Berkeley, CA, 63–88.
22
[23] National Institute of Standards and Technology, NIST GCR 11-917-15, (2011). Selecting and Scaling Earthquake Ground Motions for Performing Response-History Analyses, NEHRP Consultants Joint Venture, Page 56.
23
[24] Lin, KC.; Lin, CJ.; Chen, JY.; Chang, HY. (2010). Seismic reliability of steel framed buildings. Structural Safety, 32, 178-182.
24
[25] Baker, JW.; Cornell, CA. (2008). Vector-valued intensity measures for pulse-like near-fault ground motions. Engineering Structures, 30, 1048-1057.
25
ORIGINAL_ARTICLE
مدلسازی عددی اثر انفجار بر خطوط لوله های مدفون انتقال نفت و گاز در خاکهای مختلف به روش اویلری-لاگرانژی
در این مقاله به بررسی تنش و فشار تحت انفجار برروی لوله مدفون در خاک با استفاده از نرم افزار اجزا محدود ال اس داینا پرداخته شده است. در این مقاله پنج مدل ماده سیال، هوا، خاک، لوله و تیانتی مورد استفاده قرار گرفته است و روش حل مسئله روش اویلری-لاگرانژی میباشد. در ادامه مقایسه ای بین تنش و فشار بدست آمده از سیال ها صورت گرفته و نتایج حاصل از این مقاله نشان میدهد که با کاهش چگالی سیال، فشار وارده بر لوله بیشتر شده است و تنش و فشار بیشتری به لوله منتقل میشود و همچنین با افزابش چگالی سیال، تنش و فشار کمتری به لوله وارد میشود و همچنین با افزایش چگالی خاک مورد استفاده در مدلسازی در انفجار، تنش و فشار بیشتری به لوله انتقال یافت و با کاهش چگالی خاک، رفتار خاک مانند یک میراگر عمل میکند و تنش و فشار کمتری به لوله وارد میشود و در نتیجه آسیب کمتری به لوله وارد میشود. حال با شناخت عملکرد نوع خاک در انتقال تنش و فشار در لوله های مدفون تحت انفجار می توان پی برد که در خاکهای با چگالی بالا بایستی به دلیل انتقال بالای تنش و فشار از لوله های با مقاومت بالا استفاده نمود و در خاکهای با چگالی پایین تر بدلیل عملکرد بهتر و مناسب تر خاک (مانند میراگر) و انتقال تنش و فشار کمتر می توان از لوله های با مقاومت پایین تر استفاده نمود که این امر می تواند در قیمت اجرای پروژه های خطوط انتقال نفت و گاز تاثیرگذار باشد و از لحاظ اقتصادی در اجرای پروژه های خطوط انتقال نفت و گاز مبلغ قابل توجهی را صرفه جویی کرد.
https://www.jsce.ir/article_46871_d39e0b5983acbfe241cfcf43ab6e2167.pdf
2018-06-20
88
108
10.22065/jsce.2017.80123.1114
انفجار
لوله مدفون
اویلری-لاگرانژی
تنش
فشار
ال اس داینا
محسن
پرویز
mohsen_parviz1987@yahoo.com
1
دانشجوی دکتری مهندسی سازه، گروه مهندسی عمران، واحد رودهن، دانشگاه آزاد اسلامی، رودهن، ایران
AUTHOR
بابک
امین نژاد
babak_aminnejad1983@yahoo.com
2
استادیار، گروه مهندسی عمران، واحد رودهن، دانشگاه آزاد اسلامی، رودهن، ایران
LEAD_AUTHOR
علیرضا
فیوض
alireza_fiouz@yahoo.com
3
استادیار، دانشکده مهندسی، دانشگاه خلیج فارس، بوشهر، ایران
AUTHOR
محمد هادی
علیزاده الیزئی
alizade.mh@riau.ac.ir
4
استادیار، گروه مهندسی عمران، واحد رودهن، دانشگاه آزاد اسلامی، رودهن، ایران،
AUTHOR
[1]. Yang, Zh. (1997). Finite element simulation of response of buried shelters to blast loadings. Finite Elements in Analysis and Design, 113-132
1
[2]. Lampson, C.W.(1946). Effects of impact and explosion, Explosions in Earth, NRDC Washington USA, Vol.1, No. 2, AD 221-586.
2
[3]. Reanking, W.J.M. (1870). On the thermodynamic theory of Waves of finite longitudinal disturbance, Philosophical Transactions of the Royal Society of London, Vol. 160, pp. 277-288.
3
[4]. Luccioni, B. Ambrosini, D. (2007). Effect of buried explosions, Mecanica computational, 26: p.2656- 2673.
4
[5]. Tian, Y. Cassidy, M.J. (2008). Modeling of pipe–soil interaction and its application in numerical simulation", International Journal of Geomechanics 8(4): P. 213- 229.
5
[6]. Lampson. C.W. (1946). Effects of impact and explosions, Explosions in Earth", NRDC Washington, USA, Vol, 1, Chapter 3.
6
[7]. Tham, C. (2006). Numerical and empirical approach in predicting the penetration of a concrete target by an ogive-nosed projectile. Finite Elements in Analysis and Design, Vol. 42, No. 14, pp. 1258-1268, DOI: 10.1016/j.finel.2006.06.011.
7
[8].Wu, C., Oehlers, D., Rebentrost, M., Leach, J., and Whittaker, A. (2009). Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs. Engineering Structures, Vol. 31, No. 9, pp. 2060-2069, DOI: 10.1016/j.engstruct.2009.03.020.
8
[9]. Yan, S. and Xu, Y. R., Chang, H. Y. (2012). Numerical Simulation of Dynamic Response of Buried Pipeline by Ground Explosion. Earth and Space, pp. 1159–1166.
9
[10]. Parviz M, Aminnejad, B. Fiouz, A.R. (2017). Numerical Simulation of Dynamic Response of Water in Buried Pipeline under Explosion. KSCE Journal of Civil Engineering. doi: 10.1007/s12205-017-0889-y.
10
ORIGINAL_ARTICLE
مطالعه تاثیر نوع سنگدانه بر مقاومت و نفوذپذیری بتن
نفوذ پذیری یکی از عوامل مهم و تاثیر گذار بر دوام بتن میباشد. از اینرو در این مقاله به بررسی تاثیر عواملی نظیر مقاومت بتن، جذب آب، چگالی و مقاومت سنگ بر نفوذ پذیری بتن پرداخته شد. در ساخت بتنهای مورد مطالعه بطور مجزا از هشت نوع سنگ با ویژگیهای متفاوت به نامهای سیلیس، مرمریت، آندزیت، آهک، تراورتن، توف، توف متراکم و گرانیت استفاده گردید. همچنین جهت تعیین نفوذ پذیری بتن از روش ابداعی محفظه استوانه ای و برای تعیین مقاومت بتن و صخره سنگ از روش مقاومت فشاری تک محوره و روش ابداعی پیچش استفاده شد. نتایج بدست آمده نشان داد که ارتباط بین مقاومت و نفوذ پذیری بتن، با ضریب همبستگی بین تا ، بیش از ضریب همبستگی سایر عوامل مانند جذب آب، چگالی و مقاومت صخره با نفوذ پذیری بتن میباشد. همچنین بتن بدست آمده از سنگدانههای تراورتن دارای بیشترین و بتن بدست آمده از سنگدانههای گرانیت دارای کمترین مقدار نفوذ آب بوده و نفوذ پذیری بتن حاصل از سنگدانههای اندزیت و توف، با گذشت زمان مشابه میباشد. با مشاهده روند نفوذ آب در بتن، مشاهده شد که نفوذ پذیری بتن بدست آمده از سنگدانه آهک، 8/11 برابر نفوذ پذیری بتن بدست آمده از سنگدانه گرانیت میباشد.
https://www.jsce.ir/article_46872_6f401c540c9adf68c6e65798fd37bc90.pdf
2018-06-20
109
126
10.22065/jsce.2017.81402.1134
نفوذ پذیری
بتن
روش پیچش
محفظه استوانه ای
جذب آب
صخره سنگ
محمود
نادری
naderi-m@ikiu.ac.ir
1
استاد، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران
LEAD_AUTHOR
رضوان
ولی بیگی
r.valibeigi@yahoo.com
2
کارشناس ارشد مهندسی عمران، مدیر گروه مهندسی عمران، آموزشکده فنی (پردیس وزارت راه و شهرسازی)، لوشان، ایران
AUTHOR
سید محمد
میر صفی
s.m.mirsafi@gmail.com
3
کارشناس ارشد مهندسی سازه، گروه مهندسی عمران، واحد تاکستان، دانشگاه آزاد اسلامی، تاکستان، ایران
AUTHOR
[1] Neville, A.M. (2011). Property of concrete) 5th Ed. (, Prentice Hall Pub.
1
[2] Mehta, P.K. Monteiro, P.J.M. Concrete: Micro-structure, properties and materials (3th Ed. (, Mc Graw-Hill, New York.
2
[3] Yang, C. C. Cho, S.W. (2003). Influence of aggregate content on the migration coefficient of concrete materials using electrochemical method. Materials Chemistry and Physics, vol. 80, pp. 752 –757.
3
[4] Basheer, L. Kroop, J. and Cleland, D.J. (2001). Assessment of durability of concrete from its permeation properties: A Review. Construction and building materials, No. 15, pp. 93 – 103.
4
[5] Banthia, N. Biparva, A. and Mindess, S. (2005). Permeability of concrete under stress. Cement and Concrete Research, No. 35, pp. 1651 – 1655.
5
[6] Jain, A.K. Chauhan, J.S. Goliya, S.S. (2011). Effect of shape and size of aggregate on permeability of pervious concrete. Journal of Engineering Research and Studies, Vol. II, October–December, pp 48-56.
6
[7] Özen, M. (2007). Investigation of relationship between aggregate shape parameters and concrete strength using imaging techniques. Thesis MS.c. in Civil Engineering, University of Murat Özen,Turkey.
7
[8] Final Report National concrete pavement technology center. (2009). Investigation into freezing-thawing durability of low-permeability concrete with and without air entraining agent. Tehran.
8
[9] Tao, Ji. (2005). Preliminary study on the water permeability and microstructure of concrete incorporating nano-sio2. Cement and Concrete Research, No. 35, PP. 1943-1947.
9
[10] Building and housing research center. (2004). Researches First international concrete and development conference. Tehran: Building and housing research center pub.
10
[11] Montes, P. Bremmer, T.W. and Castellanos, F. (2006). Interactive effects of fly ash and CNI on corrosion of reinforced high-performance concrete. Materials and Structures, Vol. 39, Issue 2, pp 201–210.
11
[12] Kolias S. and Georgiou C. (2005). The effect of paste volume and of water content on the strength and water absorption of concrete. Journal of Cement & Concrete Composites, No. 27, pp 211-216.
12
[13] Ahmad, S. Azad, A.K. and Loughlin, K.F. (2005). A study of permeability and tortuosity of concrete. 30th Conference on Our World in Concrete & Structures, Singapore, 23 - 24 August.
13
[14] Hefnawy, E.El. Ibrahim, A.A. R.A. F. (2014). Comparative study on strength, permeability and sorptivity of concrete and their relation with concrete durability. International Journal of Engineering and Innovative Technology (IJEIT), Vol. 4, Issue 4. Pp. 123-131.
14
[15] Building and Housing Research Center, (2014). National durability of concrete code in Persian Gulf and Oman Sea, Issue: 428. Tehran. Building and Housing Research Center pub. P.P. 34-35.
15
[16] Minnesota Department of Transportation, (2009). Effect of concrete materials on permeability of concrete mixes used in MINNESOTA department of transportation paving projects. U.S. state of Minnesota. Minnesota highway research pub.
16
[17] Mehta, P.K. Kumar, P. Monteiro, P.J.M. (2006). Concrete microstructure, properties and materials: Advanced Concrete Technology, Mc-Grow Hill.
17
[18] Gomes, J.P.C.L.A. de Oliveira, P. and Perei, C.N.G. (2002). Discussion of aggregate and concrete water absorption and permeability testing methodology. World Congress on Housing Construction- An Inter- disciplinary Task, September 9-13, Coimbra, Portugal.
18
[19] Zhang, S.P. and Zong, L. (2014). Evaluation of relationship between water absorption and durability of concrete materials. Advances in Materials Science and Engineering, 8 pages.
19
[20] Zhang, F. Guo, L. and Chi, N.M.X. (2014). Coarse aggregate effects on compressive strength and permeability coefficient of non-fine concrete. EJGE, Vol. 19, PP.8905-8913.
20
[21] Ghiasvand, e. Zareee, b. Sharifi, p. Saraee, e. (2015). Effect variation of maximum of size of aggregate on permeability of common concretes”, 7th annual national concrete conference, Tehran.
21
[22] Naderi, M. (2009). Ways to improve and determine of laboratory and in-situ strength of concrete, (first vol.), published Roozbehan, Tehran.
22
[23] Ammar, Y. and Kabagire K. (2014). New approach to proportion pervious concrete. Construction and Building Materials, vol. 62:38-46.
23
[24] Naderi, M. (2010). Registration of Patent in Companies and industrial property Office. Determine of concrete, stone, mortar, brick and other construction materials permeability with cylindrical chamber method. Reg. N. 67726. Iran.
24
[25] Taheri, M. (2011). Laboratory measurement of concrete permeability with cylindrical chamber method. MS.c. Thesis, International Imam Khomeini University.
25
[26] Naderi, M. and et. al. (2011). Laboratory determined permeability of concrete with cylindrical chamber method. First international conference of un-permeable concrete- Drinking water of storage tanks, Water and sewer, Guilan, Iran.
26
[27] Naderi, M. (2002). Registration of Patent in Companies and industrial property Office, Twist-off method, Iran.
27
[28] Naderi, M. and Hajinasri, S.A. (2013). Using Twist-off Method for Measuring CFRP/Concrete Adhesion when Exposed to Cyclic Temperature Changes, Wet-Dry and Freeze-Thaw. The Journal of Adhesion, Vol. 89 (7), pp. 559-577.
28
[29] Naderi, M. (2007). New Twist-Off Method for the Evaluation of In-Situ Strength of Concrete, Journal of Testing and Evaluation, Vol. 35, No. 6, pp. 602-608.
29
[30] Naderi, M. (2011). Using Twist-Off Method for Measuring Surface Strength of Concretes Cured under Different Environments, Journal of Materials in Civil Engineering, Vol. 23 (4), pp. 121-133.
30
[31] Naderi, M. (2006). Assessing the in situ strength of concrete, using new Twist-Off method. International journal of civil engineering, vol.4, No.2., pp. 146-155.
31
[32] ASTM D4543-08, Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances.
32
[33] ASTM D2216-10, Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass.
33
[34] ASTM D7263-09, Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens.
34
[35] ASTM C136-06, Standard test method for sieve analysis of fine and coarse aggregates.
35
[36] ASTM C33 / C33M-11, Standard Specification for Concrete Aggregates.
36
[37] ASTM C150 / C150M-09, Standard Specification for Portland cement.
37
[38] ASTM C494 / C494M Type B, D & G., Standard Specification for Chemical Admixtures for Concrete.
38
ORIGINAL_ARTICLE
تحلیل خطر لرزهای احتمالاتی و تهیه طیف خطر یکنواخت استان بوشهر با فرض مدل هندسی خطی چشمههای لرزهزا
یافتههای علمی نشان میدهند که با استفاده از روشهای آماری و احتمالی تحت عنوان تحلیل خطر لرزهای، میتوان ایمن بودن سازهها در مقابل زمینلرزه را تا حد مطلوبی برآورد نمود. مطالعه حاضر، نتایج این تحلیل را با استفاده از رهیافت احتمالی و در مواردی با استفاده از رهیافت تعیینی ارائه میدهد. این مطالعات به منظور بررسی وضعیت لرزهخیزی در استان بوشهر و با انتخاب گستره طرحی به شعاع 150 کیلومتر از مرزهای استان صورت گرفته است. بدین منظور منابع لرزهزا در گستره طرح با استفاده از نقشههای موجود، تعیین و سپس مدل مناسب از چشمههای لرزهزا بهصورت خطی در منطقه ارائه شده است. فهرست زمینلرزههای روی داده در محدوده مطالعاتی از طریق اسناد تاریخی و ثبت دستگاهی جمعآوری شده و با استفاده از روشهایی، نواقص موجود در این کاتالوگ مرتفع گردیده است. دستیابی به توزیع پواسونی با بهکارگیری روش پنجره زمانی- مکانی گاردنر و نوپوف و حذف پسلرزهها و پیشلرزهها انجام شده است. در ادامه با استفاده از روشهای کیکو و گوتنبرگ- ریشتر، پارامترهای لرزهخیزی محاسبه و پس از انجام بررسیهایی بهترین نتایج انتخاب شدهاند. در نهایت پارامترهای مذکور، با توجه به توان لرزهزایی هر گسل به گسلهای منطقه اختصاص داده میشود. پس از ترکیب منابع لرزهزا و استفاده از روابط کاهندگی مناسب، تحلیل خطر لرزهای صورت گرفته است. خروجیها به صورت طیف خطر یکنواخت با استفاده از روشهای تعیینی و احتمالی خطر لرزهای، برای شهرهای مهم استان ارائه شده است. در نهایت نقشه پهنهبندی خطر لرزهای برای دوره بازگشتهای 75، 475 و 2475 سال ترسیم شده است.
https://www.jsce.ir/article_46873_9755bbf2dd278e395f92da88ea638c00.pdf
2018-06-20
127
142
10.22065/jsce.2017.86053.1181
تحلیل خطر لرزهای
استان بوشهر
پهنهبندی
طیف خطر یکنواخت
احتمالاتی
امین
کشاورز
keshavarz@pgu.ac.ir
1
استادیار، دانشکده مهندسی، دانشگاه خلیج فارس، بوشهر، ایران
LEAD_AUTHOR
بتول
منصوری مقدم
mansoori87@gmail.com
2
کارشناسی ارشد مهندسی عمران، دانشکده مهندسی، دانشگاه خلیج فارس، بوشهر، ایران
AUTHOR
[1] Kramer, S.L. (1996). Geotechnical earthquake engineering. Pearson Education India.
1
[2] Wiemer, S., Giardini, D., Fäh, D., Deichmann, N. and Sellami, S. (2009). Probabilistic seismic hazard assessment of Switzerland: best estimates and uncertainties. Journal of Seismology, 13(4), 449-478.
2
[3] Khan, Z., El-Emam, M., Irfan, M. and Abdalla, J. (2013). Probabilistic seismic hazard analysis and spectral accelerations for United Arab Emirates. Natural hazards, 67(2), 569-589.
3
[4] Trianni, S.C.T., Lai, C.G. and Pasqualini, E. (2014). Probabilistic seismic hazard analysis at a strategic site in the Bay of Bengal. Natural Hazards, 74(3), 1683-1705.
4
[5] Ashadi, A.L., Harmoko, U., Yuliyanto, G. and Kaka, S.I. (2015). Probabilistic Seismic‐Hazard Analysis for Central Java Province, Indonesia. Bulletin of the Seismological Society of America, 105(3), 1711-1720.
5
[6] Mcguire, R.K. (2008). Probabilistic seismic hazard analysis: Early history. Earthquake Engineering & Structural Dynamics, 37(3), 329-338.
6
[7] پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله. (1385). مطالعات برآورد خطر و ریزپهنهبندی ژئوتکنیک لرزهای شهر بوشهر. استانداری بوشهر.
7
[8] Ambraseys, N.N., Simpson, K.U. and Bommer, J.J. (1996). Prediction of horizontal response spectra in Europe. Earthquake Engineering & Structural Dynamics, 25(4), 371-400.
8
[9] Boore, D.M., Joyner, W.B. and Fumal, T.E. (1997). Equations for estimating horizontal response spectra and peak acceleration from western North American earthquakes: a summary of recent work. Seismological research letters, 68(1), 128-153.
9
[10] Campbell, K.W. and Bozorgnia, Y. (2003). Updated near-source ground-motion (attenuation) relations for the horizontal and vertical components of peak ground acceleration and acceleration response spectra. Bulletin of the Seismological Society of America, 93(1), 314-331.
10
[11] Zare, M. (1999). Contribution à l'étude de mouvements forts en iran. du catalogue aux lois d'atténuation.
11
[12] قلیپور، ی.، بزرگنیا، ع.، رهنما، م. و همکاران. (1389). گزارش نهایی تحلیل خطر لرزه ای ایران- فازیک محدوده تهران بزرگ. معاونت برنامه ریزی و نظارت راهبردی ریاست جمهوری، دفتر فنی و تدوین معیارها و کاهش خطرپذیری زلزله، دانشگاه تهران.
12
[13] پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله. (1385). مطالعات برآورد خطر و پهنهبندی ژئوتکنیک لرزهای در ساختگاه سایت 3 پارس، جلد اول.
13
[14] منصوریمقدم، ب. (1391). تحلیل احتمالی خطر لرزهای در استان بوشهر. پایان نامه کارشناسی ارشد، دانشگاه خلیج فارس، بوشهر، ایران.
14
[15] Wells, D.L. and Coppersmith, K.J. (1994). New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement. Bulletin of the Seismological Society of America, 84(4), 974-1002.
15
[16] Mohajer-Ashjai, A. and Nowroozi, A.A. (1978). Observed and probable intensity zoning of Iran, Tectonophysics, 49, 149-150.
16
[17] Nowroozi, A.A. (1985). Empirical relations between magnitudes and fault parameters for earthquakes in Iran. Bulletin of the Seismological Society of America, 75(5), 1327-1338.
17
[18] Ambraseys, N.N. and Melville, C.P. (1982). A history of Persian earthquakes. Cambridge University press.
18
[19] Engdahl, E.R., Van Der Hilst, R. and Buland, R. (1998). Global teleseismic earthquake relocation with improved travel times and procedures for depth determination. Bulletin of the Seismological Society of America, 88(3), 722-743.
19
[20] کمیته ملی سدهای بلند ایران (1994). رابطه میان بزرگی امواج سطحی و بزرگی امواج حجمی. تهران، ایران.
20
[21] Papazachos, V., Papazachos, B., Papazachou, C. and Papazachou, K. (1997). The earthquakes of Greece. Editions Ziti.
21
[22] Heaton, T.H., Tajima, F. and Mori, A.W. (1986). Estimating ground motions using recorded accelerograms. Surveys in Geophysics, 8(1), 25-83.
22
[23] Gardner, J. and Knopoff, L. (1974). Is the sequence of earthquakes in southern California, with aftershocks removed, poissonian. Bulletin of the Seismological Society of America, 64(5), 1363-1367.
23
[24] Wiemer, S. (2001). A software package to analyze seismicity: ZMAP. Seismological Research Letters, 72(3), 373-382.
24
[25] Gutenberg, B. and Richter, C.F. (1956). Earthquake magnitude, intensity, energy, and acceleration (second paper). Bulletin of the seismological society of America, 46(2), 105-145.
25
[26] Kijko, A. and Sellevoll, M. (1992). Estimation of earthquake hazard parameters from incomplete data files. Part II. Incorporation of magnitude heterogeneity, Bulletin of the Seismological Society of America, 82(1), 120-134.
26
[27] Kijko, A. (2001). HN2.FOR Program: Seismic Hazard Assessment from Incomplete & Uncertain Data, Version B: Lambda and Beta are Calculated Simultaneously. Written by A. Kijko on 24 June 1988, Revised by P. Mantyiemi on 2 Dec. 1990, Realesded 2/08/04 Nov. 2001.
27
[28] Kijko, A. (2004). Estimation of the maximum earthquake magnitude, mmax. Pure and Applied Geophysics, 161(8), 1655-1681.
28
[29] Boore, D.M. and Atkinson, G.M. (2008). Ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5%-damped PSA at spectral periods between 0.01 s and 10.0 s. Earthquake Spectra, 24, 99-138.
29
[30] Campbell, K.W. and Bozorgnia, Y. (2008). NGA ground motion model for the geometric mean horizontal component of PGA, PGV, PGD and 5% damped linear elastic response spectra for periods ranging from 0.01 to 10 s, Earthquake Spectra, 24, 139-171.
30
[31] Chiou, B.S.J. and Youngs, R.R. (2008). An NGA model for the average horizontal component of peak ground motion and response spectra. Earthquake Spectra, 24, 173-215.
31
[32] Shoja–Taheri, J., Naserieh, S. and Hadi, G. (2010). A test of the applicability of NGA models to the strong ground-motion data in the Iranian plateau. Journal of Earthquake Engineering, 14(2), 278-292.
32
[33] Ghasemi, H., Zare, M., Fukushima, Y. and Koketsu, K. (2009). An empirical spectral ground-motion model for Iran. Journal of seismology, 13(4), 499-515.
33
[34] Abrahamson, N. and Silva, W. (1997). Empirical response spectral attenuation relations for shallow crustal earthquakes. Seismological Research Letters, 68(1), 94-127.
34
[35] Ambraseys, N., Douglas, J., Sarma, S. and Smit, P. (2005). Equations for the estimation of strong ground motions from shallow crustal earthquakes using data from Europe and the Middle East: Vertical peak ground acceleration and spectral acceleration. Bulletin of Earthquake Engineering, 3(1), 55-73.
35
[36] Kaklamanos, J., Baise, L.G. and Boore, D.M. (2011). Estimating unknown input parameters when implementing the NGA ground-motion prediction equations in engineering practice. Earthquake Spectra, 27(4), 1219-1235.
36
[37] Shapira, A. and Van Eck, T. (1993). Synthetic uniform-hazard site specific response spectrum. Natural Hazards, 8(3), 201-215.
37
[38] IBC, (2006). International Building Code, International Code Council, Inc.
38
ORIGINAL_ARTICLE
بررسی نقش شرایط مرزی متفاوت در کمانش ستون های واقع بر بستر الاستیک
یکی از موضوعات مهندسی که از پیچیدگیهای قابل ملاحظهای برخوردار است کمانش ستونهای واقع بر بستر الاستیک است. در این تحقیق، موضوع کمانش ستونهای واقع بر بستر الاستیک با شرایط مرزی مختلف به روش انرژی بررسی شده است. لازم به ذکر است که در این مقاله، ستونها بوسیله تعداد زیادی میلههای صلب دو سر مفصل که بوسیله فنرهای پیچشی به یکدیگر متصل شده بودند، مدل گردیدند و بستر الاستیک نیز بوسیله فنرهایی طولی مدل شد. با تدوین برنامههایی کامپیوتری، برای پنج نوع ستون با شرایط مرزی مختلف، بار بحرانی این نوع ستونها استخراج گردید. ابتدا با در نظر گرفتن سختی صفر برای فنرهای طولی و با داشتن مقادیر تحلیلی بارهای بحرانی ستونها، ضریب سختی فنرهای پیچشی بدست آمد. سپس، با تعریف پارامتری بیبعد که بیانگر سختی نسبی بستر الاستیک نسبت به سختی خمشی ستون بود، بار بحرانی برای پنج نوع ستون برای محدوده وسیعی از سختی نسبی بستر الاستیک بدست آورده شد و نتایج کار به صورت نمودارهایی ارائه گردید. با توجه به اینکه برای ستون دو سر مفصل متکی بر بستر الاستیک حل تحلیلی وجود دارد، در این مرحله، صحت-سنجی کار برای این نوع ستون انجام شد و تطابق بسیار خوبی بین بار کمانشی بدست آمده از حل تحلیلی و بار کمانشی بدست آمده از مدل اجزاء محدود برای سختیهای نسبی مختلف بستر مشاهده شد. با استفاده از روش برازش منحنی، برای چهار نوع ستون دیگر، روابطی ریاضی پیشنهاد شد که با استفاده از این روابط ریاضی، بار بحرانی ستونهای مذکور با دقت قابل قبول مهندسی بر حسب سختی نسبی بستر الاستیک محاسبه میشود.
https://www.jsce.ir/article_46875_85334a29b71b55285927b5f3736c1a44.pdf
2018-06-20
143
156
10.22065/jsce.2017.86913.1204
کمانش
بستر الاستیک
شرایط مرزی
مدل اجزاء محدود
حل تحلیلی
سیدمحمدرضا
حسنی
smr.hasani@yahoo.com
1
کارشناس ارشد مهندسی سازه، دانشکده فنی و مهندسی، دانشگاه قم، ایران
AUTHOR
مسعود
محمودآبادی
m.mahmoudabadi@qom.ac.ir
2
استادیار، دانشکده فنی و مهندسی، دانشگاه قم، قم، ایران
LEAD_AUTHOR
رسول
دانایی
rasouldanaei@yahoo.com
3
دانشجوی کارشناسی ارشد سازه، دانشکده فنی و مهندسی، دانشگاه قم، ایران
AUTHOR
[1] Chen ,W. F, Lui, E. M. )1987(. Structural Stability: Theory and Implementation”, Englewood New Jersey, PTR Prentice Hall, pp.2 &426.
1
[2] Hetenyi, M., Beams on elastic Foundation. 8th printing, Ann Arbor.
2
[3] Timoshenko, S. P., Gere, J. M., )1961(. Theory of elastic stability. 2nd. Ed.New York, N.Y., McGraw-Hill, pp. 100-107.
3
[4] West, H. H., Mafi, M. )1984(. Eigenvalues for columns on elastic supports. J. Struct. Engrg, ASCE, Vol. 110, No. 6, pp. 1305-1320.
4
[5] Razaqpur, D. G. (1986(, Stiffness of beam-columns on elastic foundation with exact shape functions. Computers & Structures, Vol. 24, No.5, pp. 813-819.
5
[6] Cheng, F. Y., Pantelides, C. P.,)1988(, Static Timoshenko Beam-Columns on Elastic Media. J. Struct. Engrg. ASCE, Vol. 114, No. 5, pp.1152-1172.
6
[7]Wang, C-M., Xiang, Y., Kitipornchai, S., (1991). Buckling of restrained columns with shear deformation and axial shortening. J. of Engrg. Mech.ASCE,Vol.117,No. 9, pp.)1973(-)1989(.
7
[8] Struthers, A., Jayaraman, G. )2010(. Elastic stability of columns on partial elastic foundations under subtangential loading. J. of Sound and Vibration, Vol. 329, No. 18, pp. 3856-3865.
8
[9] Morfidis, K. ( 2010(. Vibration of Timoshenko beams on three-parameter elastic foundation. Computers & Structures, Vol. 88, No. 5-6, pp. 294-308.
9
[10] Avramidis, I. E., Morfidis, K. ) 2006(. Bending of beams on three-parameter elastic foundation. Int. J. Solids Struct., Vol. 43, pp. 357-375.
10
[11] Onu, G. ) 2008(.Finite Elements on Generalized Elastic Foundation in Timoshenko Beam Theory. J. of Engineering Mechanics-ASCE, Vol.134, No.9, pp.763-776.
11
[12] Aristizabal-Ochoa, J. D., K. )1994(. Factor for Columns in any Type of Construction: Nonparadoxical Approach. J. Struct. Engrg. ASCE, Vol.120,No.4, pp.1272-1290.
12
[13] Areiza-Hurtado, M., Vega-Posada, C., Aristizabal-Ochoa, J. D., Second-)2005(. Order Stiffness Matrix and Loading Vector of a Beam Column with Semirigid Connections on an Elastic Foun-dation..,J. Engrg. Mech., ASCE, Vol. 131,No.7, pp.752-762.
13
[14] Arboleda-Monsalve, L. G., Zapata-Medina, D. G. and AristizabalOchoa,J. D.,Timoshenko. )2008(. beam-column with generalized end conditions on elastic foundation: Dynamic-stiffness matrix and load vector., Journal of Sound and Vibration, Vol. 310, pp.1057-1079.
14
[15] Zapata-Medina, D. G. Arboleda-Monsalve, L. G. AristizabalOchoa, J. D. )2010(. Static Stability Formulas of a Weakened Timoshenko Column: Effects of Shear Deformations. J. of Engineering Mechanics-ASCE, Vol. 126, No. 12,pp.1-9.
15
[16] Aristizabal-Ochoa,J. D. )2013). Stability of slender columns on an elastic foundation with generalised end conditions. Ingeniera e Investigacion, Vol. 33, No. 3, pp. 34 - 40.
16
ORIGINAL_ARTICLE
ارزیابی و مقایسه رفتار ساختمان های بلند با سیستم مهاربازویی و کمربند خرپایی با استفاده از منحنی های شکنندگی
در طراحی ساختمانهای بلند، سه پارامتر مقاومت، سختی و پایداری بسیار مهم میباشند و هر چه ارتقاع ساختمان بلندتر میشود تاثیر سختی و پایداری در طراحی بهینه سازه، بیشتر میگردد و اثرات این دو فاکتور، جهت طراحی در برابر بارهای جانبی باد و زلزله، غالب میگردند. بهترین روش برای ارضاکردن این دو فاکتور، استفاده از فرمها و مدلهای ابتکاری سازهها، به شکلی که ضمن حفظ سختی، با کاهش تغییر شکلها و دریفتهای ناشی از بارهای جانبی، پایداری سازه را افزایش دهد. سیستم قاب فولادی با کمربند خرپایی و مهار بازویی، یکی از سیستمهای ابتکاری و جدید در سازههای بلند میباشد که استفاده از آن باعث کاهش قابل ملاحظهای در مقادیر مصرفی فولاد سازهای و هزینه های احداث ساختمان بلند میگردد. در این تحقیق، دو قاب 5 دهانه 30و50 طبقه 2 بعدی بر اساس آییننامههای رایج ایران با دوسیستم قاب خمشی و کمربند خرپایی با مهار بازویی، بارگذاری و در حالت LRFD طراحی گردید و سپس با استفاده از نرم افزار SAP2000 و روش تحلیل تاریخچه زمانی و اعمال 12 رکورد زلزله مختلف به سازه، مقادیر تغییر مکانها استخراج و ماکزیمم دریفت نسبی طبقات هر قاب محاسبه گردید. با تعریف سه آستانه عملکردی IO، LS و CP و بر اساس شدت شتاب هر رکورد زلزله، مقادیر تابع احتمال گذشت دریفت سازه از آستانه-های عملکردی تعریف شده محاسبه گردید و پس از ترسیم منحنیهای شکنندگی هر رکورد و مقایسه منحنیهای شکنندگی حالت-های مختلف، نتیجهگیری شدهاست که استفاده از سیستم کمربند خرپایی و مهاربازویی در قابهای2 بعدی30 و50 طبقه، به طور متوسط به میزان12 تا 28 درصد باعث کاهش احتمال فراگذشت دریفت ماکزیمم طبقات از آستانههای تعریف شده میگردد.
https://www.jsce.ir/article_47361_0e9dc0b93e6c2b9b1a7f75c0dfa8365f.pdf
2018-06-20
174
188
10.22065/jsce.2017.71179.1026
کمربند خرپایی
مهار بازویی
منحنی شکنندگی
تابع احتمال
تحلیل غیرخطی تاریخچه زمانی
حامد
حمیدی
h.hamidi@nit.ac.ir
1
استادیار، دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
LEAD_AUTHOR
جعفر
پاکدامن
j_a_pakdaman@yahoo.com
2
کارشناس ارشد مهندسی سازه، موسسه آموزش عالی علوم و فنون آریان، بابل، ایران
AUTHOR
احسان
جهانی
e.jahani@umz.ac.ir
3
استادیار، دانشکده فنی و مهندسی، دانشگاه مازندران، بابلسر، ایران
AUTHOR
حمید
رجب نزاد
hamidrajabnejad@gmail.com
4
کارشناس ارشد مهندسی زلزله، دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، ایران
AUTHOR
[1] Anagnos T, Rojahn C and Kiremidjian A. (1995) “NCEER-ATC Joint Study on Fragility of Buildings “Technical Report NCEER-95-0003 January 20.
1
[2] Sadraddin H. (2015) “Fragility Assessment of High-Rise Reinforced Concrete Buildings“ http://scholarworks.wmich.edu/masters_theses.
2
[3] Akshay A, Khanorkar M, Denge S. V. Raut, Dr. S. P. (2016) “Belt Truss as Lateral Load Resisting Structural System for Tall Building: A Review “IJSTE - International Journal of Science Technology & Engineering, Volume 2, Issue 10.
3
[4] Taranath, Bungale s. (1988), “structural analysis & design of tall buildings”, Mcgrow-Hill Book Company.
4
[5] P.M.B. Raj Kiran Nanduri, B.Suresh, MD. Ihtesham Hussain, (2013) “Optimum Position of Outrigger System for High-Rise Reinforced Concrete Buildings under Wind and Earthquake Loadings”, American Journal of Engineering Research (AJER)
5
[6] Kennedy, R.P. Cornell, A.C. Campbell, R.D. Kaplan, S. and Perla, H.F. (1980) “Probabilistic seismic safety study of an existing nuclear power plant", Nuclear Eng & Design, page 59(2).
6
[7] Kircher, C.A. and Martin W,(1993) , " Development of fragility Curve for Estimating of Earthquake damage Work Shopon Continuing Action to Reduce losses from Earthquake , Washington ,Dc : U.S.Geological Survey.
7
[8] Anagnos, T Rojahn, C and Kiremidjiam, (1995) “ATC joint Study on Fragility of Building", NCEER-95-0003, Applied Technology Council, CA.
8
[9] Shinozuka, M, Saxena V, Deodatis G and Feng M., ( 2001) , "Development Of Fragility Curve for Multi – Span Reinforced Concrete Bridge", Dept. of Civil and Environmental Engineering , Princeton University.
9
[10] Murao, O and Yamazaki, F, (2000), “Development of fragility curves for buildings in Japan”, Confronting Urban Earthquakes: Report of Fundamental Research on the Mitigation of Urban Disasters Caused by Near-Field Earthquakes, pp. 226-230.
10
[11] Smyth, A, (2004), “Probabilistic benefit-cost analysis for earthquake damage mitigation: Evaluating measures for apartment houses in Turkey", Earthquake Spectra, 20(1), February.
11
[12] Arizaga , G, (2006), “Earthquake induced damage estimation for steel buildings in Puerto Rico", A thesis submitted in partial full-time of the requirements for the degree of master of science in civil engineering university of Puerto Rico .
12
[13] Bekir Özer AY1, M Altuğ ERBERİK and Sinan AKKAR, 3–8, (2006), “Fragility Based Assessment of The Structural Deficiencies in Turkish RC Frame Structures”, First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper Number: 593.
13
[14] Mark Adom-Asamoah, (2012), “Generation of analytic l fragility curves for Ghanaian non-ductile reinforced concrete frame buildings”, International Journal of the Physical Sciences Vol. (19), pp. 2735-2744,
14
[15] Aziminejad, A.S. and Moghadam, A, (2007), “Effects of strength distribution on fragility curves of asymmetric single story building", Proceedings of the Ninth Canadian Conference on Earthquake Engineering (June 2007) Ottawa, Ontario, Canada.
15
[16] Hoenderkamp, J. C. D. (2008). "Second outrigger at optimum location on high rise shear wall." The structural design of tall and special buildings 17: 619-634.
16
[17] M. R. Jahanshahi, R. Rahgozar, (2013) ,” Optimum Location of Outrigger-belt Truss in Tall Buildings Based on Maximization of the Belt Truss Strain Energy “ International Journal of Engineering, Vol. 26, No. 7.
17
[18] B. Heidary, H.R. Tavakoli, H. Hamidi Jamnani, R. Rahgozar, (2017), “The Effect of Lateral Load Pattern on Optimum Location of Outrigger and Belt Truss in Tall Buildings”, Civil Engineering Journal of Ferdowsi University of Mashhad, (in press, in Persian)
18
[19] Akkar, S; Sucuoglu, H and Yakut, A, (2005), “Displacement based fragility functions for low- and mid-rise ordinary concrete buildings”, Earthquake Spectra, 21(4), pp 901-927.
19
[20] Anagnos, T; Rojahn, C and Kiremidjian, A S, (1994), “Building fragility relationships for California”, Proceedings of the Fifth U S National Conference on Earthquake Engineering, pp. 389-396.
20
ORIGINAL_ARTICLE
تحلیل دینامیکی مخازن مستطیلی بتنی با در نظر گرفتن اثر اندرکنش سیال- سازه- خاک
در مقاله حاضر، رفتار دینامیکی مخازن مستطیلی بتنی با در نظر گرفتن اثر اندرکنش خاک و سازه تحت حرکت ناشی از زمینلرزه مورد بررسی قرار میگیرد. اثر اندرکنش توأم خاک- سازه- مایع بر رفتار دینامیکی مخازن مستطیلی بتنی به روش اجزاء محدود در فضای سه بعدی، براساس تحلیل خطی و در حوزهی زمانی مورد بررسی قرار میگیرد. با توجه به اینکه در بعضی از مخازن، مانند سازههای استخری بزرگ بتن مسلح که برای ذخیره سازی طولانی مدت خوشههای پسماند سوختهای هستهای استفاده میگردند انعطافپذیری دیواره مخزن میتواند اثر قابل توجهی در پاسخهای دینامیکی ایجاد کند، دیوارهای مخزن به صورت ورقهای انعطافپذیر در نظر گرفته شدهاند. خاک فونداسیون به عنوان یک محیط محدود الاستیک همگن با شرایط مرزی لزج که به منظور شبیه سازی جذب انرژی امواج در نواحی بریده شده آن قرار گرفته، مدل شدهاست. به منظور ارزیابی دینامیکی مخزن واقع شده بر روی فونداسیون، شش نوع تیپ خاک مختلف که مورد تأیید آییننامهها و استانداردهای طراحی کنونی هستند مورد استفاده قرار گرفتهاند. در مدل مورد مطالعه با استفاده از روش اجزاء محدود، تأثیر تیپهای مختلف خاک بر روی پاسخهای سازهای مورد ارزیابی گرفته و با تغییر خصوصیات خاک، مقایسههایی بین پاسخهای دینامیکی از قبیل برش پایه، لنگر پایه، منحنیهای توزیع فشار هیدرودینامیکی و پاسخهای تلاطمی تحت دو شتابنگاشت مختلف انجام گردیده است. نتایج نشان میدهد خاک زیر مخزن بسته به جنس آن میتواند تغییرات قابل ملاحظهای در پاسخهای سازهای ایجاد کند.
https://www.jsce.ir/article_47363_4f5703e310fb06d6808e639c4a298782.pdf
2018-06-20
189
209
10.22065/jsce.2017.74970.1060
رفتار لرزه ای
مخازن مستطیلی بتنی
اندرکنش خاک- سازه- مایع
ارتفاع تلاطم امواج
روش اجزاء محدود
مهرداد
خوبانی
mehrdad.khoubani.1991@gmail.com
1
کارشناس ارشد مهندسی عمران سازه، دانشکده فنی و مهندسی، دانشگاه یاسوج، یاسوج، ایران
AUTHOR
شمس الدین
هاشمی
shamsodin@gmail.com
2
استادیار، دانشکده فنی و مهندسی، دانشگاه یاسوج، یاسوج، ایران
LEAD_AUTHOR
علی
علی پور
aalipourm@yu.ac.ir
3
استادیار، دانشکده فنی و مهندسی، دانشگاه یاسوج، یاسوج، ایران
AUTHOR
[1] Luft, R.W. (1984). Vertical accelerations in prestressed concrete tanks. Journal of Structural Engineering, Volume (110), Page(706–714).
1
[2] Kim, J.K. Koh, H.M. and Kwahk, I.J. (1996). Dynamic response of rectangular flexible fluid containers. Journal of Engineering Mechanics, Volume(122), Page(807-817).
2
[3] Park, J.H. Koh, H.M. and Kim, J.K. (2000). Seismic isolation of pool-type tanks for the storage of nuclear spent fuel assemblies. Nuclear Engineering and Design, Volume(199), Page(143-154).
3
[4] Hoskins, L.M. and Jacobsen, L.S. (1934). Water pressure in a tank caused by simulated earthquake. Bulletin of the Seismological Society of America, Volume (24), Page(1-32).
4
[5] Housner, G.W. The Dynamic behavior of water tanks. Bulletin of the Seismological Society of America, Volume (53), Page(381-387).
5
[6] Haroun, M.A. (1984). Stress analysis of rectangular walls under seismically induced hydrodynamic loads. Bulletin of the Seismological Society of America, Volume (74), Page(1031-1041).
6
[7] Chen, J.Z. and Kianoush, M.R. (2009). Generalized SDOF system for seismic analysis of concrete rectangular liquid storage tanks. Engineering Structure, Volume (31), Page(2426-2435).
7
[8] Shekari, M.R. Khaji, N. and Ahmadi, M,T. (2009). A coupled BE-FE study for evaluation of seismically isolated cylindrical liquid storage tanks considering fluid-structure interaction. Journal of Fluids and Structures, Volume (25), Page(567-585).
8
[9] Hashemi, S. Saadatpour, M.M. and Kianoush, M.R. (2013). Dynamic behavior of flexible rectangular fluid containers. Thin-Walled Structures, Volume (66), Page(23-38).
9
[10] Hashemi, S. Saadatpour, M.M. and Kianoush, M.R. (2013). Dynamic analysis of flexible rectangular fluid containers subjected to horizontal ground motion. Earthquake Engineering and Structural Dynamics, Volume (42), Page(1637-1656).
10
[11] Veletsos, A.S. Tang, Y. (1987). Rocking response of liquid storage tanks. ASCE Journal of Engineering Mechanics, Volume (113), Page(1774-1792).
11
[12] Veletsos, A.S. Tang, Y. (1990). Soil–structure interaction effects for laterally excited liquid storage tanks. Earthquake Engineering and Structural Dynamics, Volume(19), Page(473-496).
12
[13] Haroun, M.A. and Abou-Izzeddine, W. (1992). Parametric study of seismic soil-tank interaction. I: Horizontal excitation. ASCE Journal of Structural Engineering, Volume (118), Page(783-797).
13
[14] Cho, K.H. Kim, M.K. Lim, Y.M. and Cho, S.Y. (2004). Seismic response of base-isolated liquid storage tanks considering fluid-structure-soil interaction in time domain. Soil Dynamics and Earthquake Engineering, Volume (24), Page(839-852).
14
[15] Livaoglu, R. and Dogangun, A. (2007). Effect of foundation embedment on seismic behavior of elevated tanks considering fluid-structure-soil interaction. Soil Dynamics and Earthquake Engineering, Volume (27), Page(855-863).
15
[16] Livaoglu, R. (2008). Investigation of seismic behavior of fluid-rectangular tank-soil/foundation systems in frequency domain. Soil Dynamic and Earthquake Engineering, Volume (28), Page(132-146).
16
[17] Lysmer, J. and Kuhlmeyer, R.L. (1969). Finite dynamic model for infinite media. ASCE Journal of Mechanical Engineering, Volume (95), Page(859-77).
17
[18] Koh, H.M. Kim, J.K. and Park, J.H. (1998). Fluid-structure interaction analysis of 3-D rectangular tanks by a variationally coupled BEM-FEM and comparison with test results. Earthquake Engineering and Structural Dynamics, Volume (27), Page(109-124).
18
ORIGINAL_ARTICLE
بررسی ضریب رفتار قابهای خمشی فولادی با مهاربند واگرا و تیر مقطع کاهشیافته
سیستمهای مهاربند واگرا از جمله سیستمهای مقاوم در برابر بارهای جانبی میباشند. عضو شکلپذیر در این سیستمها تیر پیوند میباشد که جذب و استهلاک انرژی از طریق این عضو انجام میگیرد. مکانسیم جذب انرژی در تیر پیوند از طریق تغییرشکلهای پلاستیک ایجاد شده ناشی از برش و خمش و در این عضو صورت میگیرد. ضعف اتصالات مرسوم قابهای خمشی در زلزلههای گذشته باعث شد که تیربا مقطع کاهشیافته در انتها برای بهبود عملکرد قابها معرفی گردد. با کاربرد تیرهای با مقطع کاهش یافته موقعیت تشکیل مفصل پلاستیک در محدوده ای دور از نواحی اتصال تیر به ستون تضمین شده و رفتار شکل پذیر در تیر تامین میگردد. در این مقاله با استفاده از روش تحلیل استاتیکی غیرخطی در نرمافزار المان محدود ABAQUS به تعیین ضریب رفتار سیستم مهاربند واگرا بدون تیر مقطع کاهشیافته و سیستم مهاربند واگرا با تیر مقطع کاهشیافته (در محل تیر پیوند و سایر تیرهای قاب مهاربندی شده) با تعداد طبقات چهار ، هشت و دوازده پرداخته شد. سپس با استفاده از تحلیل تاریخچه زمانی به بررسی رفتار لرزهای این دو سیستم پرداخته شد. نتایج حاصل از این تحقیق نشان میدهد که استفاده از تیر مقطع کاهشیافته سبب افزایش ضریب رفتار و ضریب شکلپذیری میگردد. همچنین سیستم مهاربند واگرا با تیر مقطع کاهشیافته پتانسیل جذب و استهلاک انرژی بیشتری نسبت به سیستم مهاریند واگرا بدون تیر مقطع کاهشیافته می باشد.
https://www.jsce.ir/article_48096_883c590f349a21e78302a7c07949bfc9.pdf
2018-06-20
210
227
10.22065/jsce.2017.86381.1195
مهاربند واگرا
تیر مقطع کاهشیافته
ضریب رفتار
تحلیل استاتیکی غیر خطی
تحلیلتاریخچه زمانی
رضا
اصغری سهرون
reza.asghari.sahroun@gmail.com
1
دانشجوی کارشناسی ارشد مهندسی سازه، گروه مهندسی عمران، واحد تبریز، دانشگاه آزاد اسلامی، تبریز، ایران
AUTHOR
نادر
هویدایی
hoveidaei@azaruniv.ac.ir
2
استادیار، دانشکده فنی و مهندسی، دانشگاه شهیدمدنی آذربایجان، تبریز، ایران
LEAD_AUTHOR
[1] Richards P., Uang C. (2005). Effect of flange width-thickness ratio on eccentrically braced frames link cyclic rotation capacity, Journal of Structural engineering, Vol. 131, No. 10.
1
[2] Okazaki T., Engelhardt M. (2006). Experimental Performance of Link-to-Column Connections in Eccentrically Braced Frames, Journal of Structural engineering, Vol. 132, No. 8.
2
[3] Chegeni, Mohebkhah. (2014). Rotation capacity improvement of long link beams in eccentrically braced frames, journal of Scientia Iranica.
3
[4] Lee C., Kim J. (2006). Seismic design of reduced beam section steel moment connections with bolted web attachment, Journal of Constructional Steel Research, doi:10.1016/j.jcsr.2006.06.030.
4
[5] Pachoumis D., Galoussis. (2008). Reduced beam section moment connections subjected to cyclic loading: Experimental analysis and FEM simulation, Journal of Engineering structures, doi:10.1016/j.engstruct.2008.08.007.
5
[6] Engelhardt, M.D, Popov, E. P. (1989). Behaviour of Long Links in eccentrically braced frames. journal of Earthquake Engrg. Res. Ctr., Univ. Of California, Berkeley.
6
[7] Gálvez, P. (2004). Investigation of Factors Affecting Web Fractures in Shear Links, MSc Thesis, Department of Civil Engineering, University of Texas at Austin.
7
[8]. Lignos D., Kolios D., Miranda E. (2010). Fragility Assessment of Reduced Beam Section Moment Connections, Journal of Structural engineering, Vol. 136, No. 9.
8
[9] FEMA 356. Prestandard and Commentary for the Seismic Rehabilitation of Buildings. Federal Emergency Management Agency, November 2000.
9
[10] Uang .C. (1991), Establishing R or (Rw) and Cd Factors for building seismic provision, Journal of Structural engineering
10
[11] Tasnimi A., Masoumi A. (2006). Estimation of Response Modification Factors for RC and MRF Structures, Building and Housing Research Center, (in Persian).
11
[12] INBC. Iranian National Building Code. (2015). Part 10, Design and Construction of Steel Structures. Ministry of Housing and Urban Development, Tehran.
12
[13] Building and Housing Research Center. (2015). Iranian code of practice for seismic resistance design of buildings: Standard No. 2800, 4th edition.
13
[14] http://peer.berkeley.edu
14
[15] SeismoSignal Version 5.1.2 avaliable on www.seismosoft.com.
15
[16] HKS, "ABAQUS Standard User Manual, Version 6.12.3, Hibbitt, Karlsson, and Sorensen, Inc,2009.
16
[17] Berman J., Bruneau M. (2007). Experimental and analytical investigation of tubular links for eccentrically braced frames, Journal of Structural engineering, doi: 10.1016/j.engstruct.2006.10.012.
17
ORIGINAL_ARTICLE
مدلسازی ترکیبی در پروژههای ساخت با استفاده از ترکیب رویکردهای شبیهسازی پویایی سیستم و مدلسازی عاملمحور
شبیه سازی ترکیبی ما را قادر می سازد نقاط قوت روش های شبیه سازی مختلف را با یکدیگر ترکیب نماییم. ترکیب رویکردهای شبیه شبیه سازی پویایی سیستم و مدلسازی عامل محور باعث هم افزایی در قدرت روش های شبیه سازی می شود و مدلسازان را قادر می سازد موضوعات با پیچیدگی بیشتر را مورد مطالعه قرار دهند. در این تحقیق روشی مناسب برای ترکیب رویکردهای شبیه سازی پویایی سیستم و عامل محور در صنعت ساخت ارائه شده است. روش پیشنهادی با درنظر گرفتن موارد مهمی که یک مدلساز طی انجام شبیه سازی با روش پویایی سیستم و عامل محور باید در نظر داشته باشد می تواند راهنمایی کامل برای مدلسازان باشد. در این روش پیشنهادی پنج مرحله برای ایجاد مؤثر یک مدل ترکیبی پویایی سیستم و عامل محور پیشنهاد شده است. این مراحل به صورت قدم به قدم یک مدل ترکیبی پویایی سیستم و عامل محور برای حل مشکلات پیچیده با توجه به ویژگی های آن مسأله ایجاد می کنند. برای ارزیابی عملکرد روش شبیه شبیه سازی ترکیبی پیشنهادی، این روش بر روی یک پروژه واقعی پیاده شده و رفتار ناایمن گروه های مختلف کاری با توجه به تعاملات بین این گروه های کاری و نیز محیط اطراف مورد بررسی قرار گرفته و شبیه شبیه سازی می گردد. در ادامه مدت زمان انجام پروژه با در نظر گرفتن اثر تأخیرهایی که به علت رفتار ناایمن در اتمام پروژه ایجاد می شود پیش بینی می گردد.
https://www.jsce.ir/article_47364_f0ee1bea69a3abd767a0880a6a304c9f.pdf
2018-06-20
157
173
10.22065/jsce.2017.86046.1178
مدلسازی ترکیبی
مدیریت ساخت
پروژههای ساخت
شبیه سازی پویایی سیستم
مدلسازی عامل عاملمحور
مصطفی
خانزادی
khanzadi@iust.ac.ir
1
دانشیار، دانشکده عمران، دانشگاه علم و صنعت ایران
AUTHOR
فرناد
نصیرزاده
f.nasirzadeh@gmail.com
2
استادیار، دانشکده مهندسی، دانشگاه پیام نور
LEAD_AUTHOR
مصطفی
میر
m.mir1988@yahoo.com
3
دانشگاه علم و صنعت ایران
AUTHOR
[1] Schieritz, N. and Grobler, A. (2003). Emergent structures in supply chains-a study integrating agent-based and system dynamics modeling. In: Proceedings of the 36th Annual Hawaii International Conference on System Sciences.
1
[2] Lorenz, T. and Jost, A. (2006). Toward an orientation framework in multi-paradigm modeling. In: Proceeding of the 24th International Conference System Dynamics Society.
2
[3] Lättilä, L., Hilletofth, P. and Lin, B. (2010). Hybrid simulation models–when, why, how?. Expert systems with applications, 37(12), 7969-7975.
3
[4] Mawdesley, M.J. and Al-Jibouri, S. (2009). Modelling construction project productivity using systems dynamics approach. International Journal of Productivity and Performance Management, 59(1), 18-36.
4
[5] Mostafavi, A., Abraham, D., Delaurentis, D, Sinfield, J. and Queiroz, C. (2012). Innovation Policy Assessment for Civil Infrastructure System-of-Systems. In: Construction Challenges in a Flat World in Construction Research Congress, ASCE.
5
[6] Wu, D.D., Kefan, X., Hua, L., Shi, Zh. and Olson, D.L. (2010). Modeling technological innovation risks of an entrepreneurial team using system dynamics: an agent-based perspective. Technological Forecasting and Social Change, 77(6), 857-869.
6
[7] Nasirzadeh, F., Afshar, A. and Khanzadi, M. (2008). System dynamics approach for construction risk analysis. International Journal of Civil Engineering, 6(2), 120-131.
7
[8] Sterman, J. (2000). Business Dynamics: Systems Thinking and Modeling for a Complex World. Irwin: McGraw-Hill.
8
[9] Swinerd, C. and McNaught, K.R. (2012). Design classes for hybrid simulations involving agent-based and system dynamics models. Simulation Modeling Practice and Theory, 25, 118-133.
9
[10] Sanchez, S.M. and Lucas, T.W. (2002). Exploring the world of agent-based simulations: simple models, complex analyses. In: Proceedings of the 34th conference on winter simulation: exploring new frontiers, Winter Simulation Conference.
10
[11] Sawhney, A., Bashford, H., Walsh, K. and Mulky, A.R. (2003). Agent-based modeling and simulation in construction. In: Proceedings of the 2003 Winter Simulation Conference, IEEE.
11
[12] Bonabeau, E. (2002). Agent-based modeling: Methods and techniques for simulating human systems. In: Proceedings of the National Academy of Sciences of the United States of America, 7280-7287.
12
[13] Ren, Z. and Anumba, C. (2004). Multi-agent systems in construction–state of the art and prospects. Automation in Construction,13(3), 421-434.
13
[14] Schieritz, N. and Milling, P.M. (2003). Modeling the forest or modeling the trees. In: Proceedings of the 21st International Conference of the System Dynamics Society.
14
[15] Barbati, M., Bruno,G. and Genovese, A. (2012). Applications of agent-based models for optimization problems: A literature review. Expert Systems with Applications, 39(5), 6020-6028.
15
[16] Phelan, S.E. (1999). A note on the correspondence between complexity and systems theory. Systemic Practice and Action Research, 12(3), 237-246.
16
[17] Alvanchi, A., Lee, S. and AbouRizk, S. (2011). Modeling framework and architecture of hybrid system dynamics and discrete event simulation for construction. Computer Aided Civil and Infrastructure Engineering, 26(2), 77-91.
17
[18] Shanthikumar, J. and Sargent, R. (1983). A unifying view of hybrid simulation/analytic models and modeling. Operations research, 31(6), 1030-1052.
18
[19] Martinez-Moyano, I. ,Sallach, D., Bragen, M. and Thimmapuram, P.R. (2007). Design for a multilayer model of financial stability: Exploring the integration of system dynamics and agent-based models. System Dynamics, 1-16.
19
[20] Parunak, H.V.D., Savit, R. and Riolo, R.L. (1998). Agent-based modeling vs. equation-based modeling: A case study and users’ guide. In: Multi-Agent Systems and Agent-Based Simulation, Springer.
20
[21] Glendon, A.I. and Litherland, D.K. (2001). Safety climate factors, group differences and safety behavior in road construction. Safety science, 39(3), 157-188.
21
[22] Tarrants, W. (1970). A definition of the safety measurement problem. Journal of Safety Research, 2(3), 106-108.
22
[23] Rockwell, T. (1959). Safety performance measurement. Journal of Industrial Engineering, 10(1), 12-16.
23
[24] Choudhry, R.M., Fang, D. and Mohamed, S. (2007). The nature of safety culture: A survey of the state-of-the-art. Safety Science, 45(10), 993-1012.
24
[25] Tarrants, W.E. (1980).The measurement of safety performance.
25
[26] Fitch, H.G., Hermann, J. and Hopkins, B. (1976). Safe and unsafe behavior and its modification. Journal of Occupational and Environmental Medicine,18(9), 618-622.
26