ORIGINAL_ARTICLE
ارزیابی مدل های رفتاری مناسب جهت شبیه سازی عددی آلیاژ حافظه دارشکلی نوین پایه مس
بیشتر مطالعات گذشته بر روی آلیاژهای حافظه دار شکلی، به یکی از پرکاربردترین نوع این آلیاژها با نام نیکل تیتانیوم Ni-Ti مربوط میشوند. با این حال قیمت بالا و رفتار پیچیده ی این آلیاژ به دلیل وابستگی بسیار زیاد به نرخ کرنش، محققین بسیاری را به سوی تولید آلیاژهای جایگزین سوق داده است. مقاله حاضر ضمن ارزیابی خواص آلیاژ نوین پایه مس Cu-Al-Mn که توسط یکی از محققین ژاپنی به نام اراکی معرفی گردیده، قابلیت مدلهای رفتاری برای شبیه سازی عددی این آلیاژ را بررسی میکند. آلیاژ مورد نظر ضمن بر خورداری از خواصی نظیر سوپر الاستیسیته قابل قیاس با Ni-Ti، دارای قیمت مناسب تر و وابستگی ناچیز به نرخ کرنش میباشد. با بهره گیری از خواص این آلیاژ قابلیت سه مدل مستقل از نرخ؛ مدل گراسر کوزارلی، مدل فاگازا و مدل خودبازگشتی؛ در توصیف رفتار این آلیاژ نوپا مورد بررسی قرار گرفت. مدل گراسر کوزارلی با وجود پیچیدگی بیشترنسبت به مدلهای چند خطی فاگازا و خودبازگشتی، به دلیل داشتن پارامترهای کنترل کننده، توصیف دقیق تری از رفتار آلیاژ بویژه در نقاط شروع تبدیل دو فاز از خود نشان داد. همچنین پارامترهای ثابت این مدل برای توصیف رفتار میله ای 14 میلی متری از جنس آالیاژ مذکور با انجام فرایند سعی و خطا در نرم افزار متلب ارائه گردید. نتایج شبیه سازی عددی رفتار آلیاژ Cu-Al-Mn درآزمایش کشش و شبه استاتیک توسط دو مدل فاگازا و خودبازگشتی نشان داد، این مدلها در کنار سادگی کاربرد و عدم نیاز به پارامترهای آزمایشگاهی پیچیده، انطباق قابل قبولی با نتایج آزمایشگاهی داشته اند.
https://www.jsce.ir/article_41240_177e2fe4335adea4521962caf312bbe8.pdf
2017-12-22
5
15
10.22065/jsce.2016.41240
آلیاژ حافظه دار شکلی
مدل های رفتاری
مدل گراسر کوزارلی
مدل فاگازا
مدل خودبازگشتی
مهرسا
میرزاحسینی
1
دانشجوی دکتری مهندسی عمران، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
محسن
گرامی
mgerami@semnan.ac.ir
2
دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
LEAD_AUTHOR
[1] Boroschek, R.L. Farias, G. Moroni, O. and Sarrazin, M. (2007). Effect of SMA Braces in a Steel Frame Building. Journal of Earthquake Engineering, 11 (3), 326-342.
1
[2] Dolce, M. and Cardone, D. (2001). Mechanical Behavior of Shape Memory Alloys for Seismic Applications 2. Austenite NiTi Bars Subjected to Tension. International Journal of Mechanical Sciences, 43 (11), 2657-2677.
2
[3] Wolons, D. Gandhi, F. and Malovrah, B. (1998). Experimental investigation of the pseudoelastic hysteresis damping characteristics of hape memory alloy wires. Journal of Intelligent Material Systems and Structures, 9 (2), 116-126.
3
[4] DesRoches, R. McCormick, C. and Delemont, M. (2004). Cyclic properties of superelastic shape memory alloy wires and bars. Journal of Structural Engineering, 130 (1), 38-46.
4
[5] Ren, W. Li H. and Song, G. (2007). A One-Dimensional Strain-Rate- Dependent Constitutive Model for Superelastic Shape Memory Alloys. Smart Materials and Structures, 16 (1), 191-197.
5
[6] Tobushi, H. Shimeno, Y. Hachisuka, T. and Tanaka, K. (1998). Influence of Strain Rate on Superelastic Properties of TiNi Shape Memory Alloy. Mechanics of Materials, 30 (2), 141-150.
6
[7] Dayananda, G.N. and Rao, M.S. (2008). Effect of Strain Rate on Properties of Superelastic NiTi Thin Wires. Materials Science and Engineering, 486 (1), 96-103.
7
[8] Soul, H. Isalgue, A. Yawny, A. Torra, V. and Lovey, F.C. (2010). Pseudoelastic Fatigue of NiTi Wires: Frequency and Size Effects on Damping Capacity. Smart Materials and Structures, 19 (8), 85006-85012.
8
[9] Ozbulut, O.E. and Hurlebaus, S. (2010). Neuro-Fuzzy Modeling of Temperature- and Strain-Rate-Dependent Behavior of NiTi Shape Memory Alloys for Seismic Applications. Journal of Intelligent Materials and Structures, 21 (8), 837-849.
9
[10] Ozbulut, O. E. Hurlebaus, S. and Desroches, R. (2011). Seismic Response Control Using Shape Memory Alloys: A Review. Structures Journal of Intelligent Material Systems, 22 (14), 1531-1549.
10
[11] Tanaka, K. (1986). A thermomechanical sketch of shape memory effect: onedimensional tensile behavior. Res. Mechanica, 18 (3), 251–263.
11
[12] Liang, C. and Rogers, C. A. (1990). One-dimensional thermo mechanical constitutive relations for shape memory material. Journal of Intelligent Material Systems and Structures, 1 (2), 207–234.
12
[13] Tobushi, H. Yamada, S. Hachisuka, T. Ikai, A. and Tanaka, K. (1996). Thermomechanical properties due to martensitic and R-phase transformations of TiNi shape memory alloy subjected to cyclic loadings. Journal of Smart Materials and Structures, 16 (3), 788–795.
13
[14] Graesser, E. J. and Cozzarelli, F. A. (1991). Shape-memory alloys as new materials for a seismic isolation. Journal of Engineering Mechanics, 117 (11), 2590–2608.
14
[15] Thomson, P. Balas, G. J. and Leo, P. H. (1995). The use of shape memory alloys for passive structural damping. Smart Materials and Structures, 4 (1), 36–42.
15
[16] Saadat, S. Noori, M. Davoodi, H. Hou, Z. Suziki, Y. and Masuda, A. (2001). Using NiTi SMA tendons for vibration control of coastal structures. Smart Materials and Structures, 10 (4), 695–704.
16
[17] Masuda, A. and Noori, M. (2002). Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys. International Journal of Non-Linear Mechanics, 37 (8), 1375–1386.
17
[18] Andrawes, B. and DesRoches, R. (2005). Unseating prevention for multiple frame bridges using superelastic devices. Smart Materials and Structures, 14 (3), 60–67.
18
[19] Fugazza, D. (2003). Shape-memory alloy devices in earthquake engineering: mechanical properties, constitutive modelling and numerical simulations. Master degree of earthquake engineering. European ROSE School.
19
[20] Auricchio, F. and Sacco, E. (1997). A one-dimensional model for superelastic shapememory alloys with different elastic properties between austenite and martensite. International Journal of Non-Linear Mechanics, 32 (6), 1101-1114.
20
[21] Ozbulut, O. E. (2010). Seismic protection of bridge structures using shape memory alloy-based isolation systems against near-field earthquakes. Doctor of Philosophy. Texas A&M University.
21
[22] Van, de Lindt, J.W. and Potts, A. (2008). Shake Table Testing of a Superelastic Shape Memory Alloy Response Modification Device in a Wood Shearwall. Journal of Structural Engineering, 134 (8), 1343-1352.
22
[23] Araki, Y. Endo, T. Omori, T. Sutou, Y. Koetaka, Y. Kainuma, R. and Ishida, K. (2011). Potential of superelastic Cu–Al–Mn alloy bars for seismic applications. Earthquake Engineering & Structural Dynamics, 40 (1), 107–115.
23
[24] Sutou, Y. Omori, T. Kainuma, R. and Ishida, K. (2003). Effect of grain size and texture on superelasticity of Cu–Al–Mn-based shape memory alloys. Journal of Physics, 112, 511–514
24
[25] Sutou, Y. Omori, T. Yamauchi, K. Ono, N. Kainuma, R. and Ishida, K. (2005). Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire. Acta Materialia, 53 (15) 4121–4133.
25
[26] Araki, Y. Maekawa, N. Omori, T. Sutou, Y. Koetaka, Y. Kainuma, R. and Ishida, K. (2012). Rate-dependent response of superelastic Cu-Al-Mn alloy rods to tensile cyclic loads. Smart Materials and Structures, 21 (3) 032002- 032009.
26
[27] Araki, Y. Shrestha, K.C. Maekawa, N. Koetaka, Y. Yoshida, N. Omori, T. Sutou, Y. Kainuma, R. Ishida, K. (2012). Cu-Al-Mn Super-elastic Alloy Bars as Dissipative Brace System in Structural Steel Frame. In: The 15th World Conference on Earthquake Engineering, Lisbon.
27
[28] Araki, Y. Maekawa, N. Shrestha, KC. Yamakawa, M. Koetaka, Y. Omori, T. Kainuma, R. (2014). Feasibility of tension braces using Cu–Al–Mn superelastic alloy bars. Structural Control and Health Monitoring, 21 (10), 1304–1315.
28
[29] Araki, Y. Maekawa, N. Shrestha, KC. Yamakawa, M. Koetaka, Y. Omori, T. Kainuma, R. (2015). Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces. Earthquake Engineering & Structural Dynamics, 45 (2), 297–314.
29
[30] Erochko, J A. (2013). Improvements to the design and use of post-tensioned self-centering energy-dissipative (SCED) braces. Doctor of Philosophy. University of Toronto.
30
[31] Moradi, S. Alam, S. Asgarian, B. (2014). Incremental dynamic analysis of steel frames equipped with NiTi shape memory alloy braces. The journal of Tall and Special Building, 23 (18), 1406–1425.
31
[32] Asgarian, B. Moradi, S. (2011). Seismic response of steel braced frames with shape memory alloy braces. Journal of Constructional Steel Research, 67 (1), 65-74.
32
[33] McCormick, J. DesRoches, R. Fugazza, D. and Auricchio, F. (2006). Seismic vibration control using superelastic shape memory alloys. Journal of Engineering Materials and Technology, 128 (3) 294-301.
33
[34] McCormick, J. DesRoches, R. Fugazza, D. and Auricchio, F. (2007). Seismic Assessment of Concentrically-Braced Steel Frames Using Shape Memory Alloy Braces. Journal of Structural Engineering, 133 (6), 863-870.
34
ORIGINAL_ARTICLE
پیشبینی مقاومت خمشی تیرهای تقویت شده به روش NSM-FRP با استفاده از شبکههای عصبی مصنوعی
یکی از متداولترین روشهای تقویت اعضای بتن مسلح استفاده از الیافهای پلیمری میباشد. روش کاشت آرماتورهای FRP در پوشش اعضای بتنی (NSM-FRP)، اخیراً توجه محققین بسیاری را به خود جلب کردهاست. در این روش بهدلیل اتصال بیشتر آرماتورها با بتن، از ظرفیت مصالح الیافهای پلیمری استفاده کاملتری میگردد. این روش دارای مزایای قابل توجهی نسبت به سایر روشهای مقاومسازی میباشد، این در حالی است که مطالعات عددی کمتری در این زمینه نسبت به تکنیکهای قدیمیتر مانند اتصال سطحی ورقهای FRP انجام شدهاست. شبکههای عصبی مصنوعی ابزاری مناسب و کارآمد برای بررسی و پیشبینی پاسخ یک سیستم بر پایه تعداد زیادی دادههای آزمایشگاهی میباشد. اساس کار این شبکهها مبتنی بر پروسه یادگیری به عنوان جایگزین مناسب روش رگرسیونهای معمول در جهت به حداقل رساندن خطای محتمل مطرح میباشد. در این تحقیق نتایج آزمایشات انجام شده در زمینهی تقویت خمشی تیرهای بتن مسلح با استفاده از سیستم NSM-FRP جمعآوری و پس از شناسایی پارامترهای موثر بر رفتار خمشی تیرهای تقویت شده به عنوان پارامترهای ورودی شبکه عصبی مصنوعی، با انتخاب نسبت افزایش ممان خمشی تیر به عنوان تابع هدف مدل شبکه عصبی ایجاد و به بررسی مقاومت خمشی تیرهای تقویت شده پرداخته شده است. درنهایت با توجه به بررسیهای پارامتریک، رابطهای به منظور پیشبینی مقاومت نهایی تیرهای تقویت شده ارائه شدهاست.
https://www.jsce.ir/article_44332_f2537fe81c6a8de661a957d8f2a962e1.pdf
2017-12-22
16
28
10.22065/jsce.2017.44332
تقویت خمشی
روش نصب در نزدیک سطح
NSM-FRP
مقاومت خمشی
شبکههای عصبی مصنوعی
سید روح الله
حسینی واعظ
hoseinivaez@qom.ac.ir
1
استادیار، دانشکده فنی و مهندسی، دانشگاه قم، قم، ایران
LEAD_AUTHOR
حسین
نادرپور
naderpour@semnan.ac.ir
2
دانشیار، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
محمد
براتی
3
دانشجوی کارشناسی ارشد مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم، قم، ایران
AUTHOR
[1] ACI Committee 440. (2002). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute, ACI Committee 440, 118pp.
1
[2] Kheyroddin, A., Hoseini Vaez, S.R. and Naderpour, H. (2008). Numerical analysis of slab-column connections strengthened with carbon fiber reinforced polymers. Journal of Applied Sciences, 8(3), pp. 420-431.
2
[3] Kheyroddin, A., Naderpour, H., Ghdrati Amiri, Gh. and Hoseini Vaez, S.R. (2011). Influence of carbon fiber reinforced polymers on upgrading shear behavior of RC coupling beams. Iranian Journal of Science and Technology. Transactions of Civil Engineering, 35(C2), pp. 155-169.
3
[4] Naderpour, H., Kheyroddin, A., Ghdrati Amiri, Gh. and Hoseini Vaez, S.R. (2011). Estimating the Behavior of FRP-Strengthened RC Structural Members Using Artificial Neural Networks. Procedia Engineering, 14, pp. 3183-3190.
4
[5] De Lorenzis, L. and Nanni, A. (2001). Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods. ACI Structural Journal, 98(1), pp.60-68.
5
[6] Barros, JA.O. and Fortes, A.S. (2005). Flexural strengthening of concrete beams with CFRP laminates bonded into slits. Cement and Concrete Composites, 27(2), pp. 471-80.
6
[7] De Lorenzis, L. and Teng, J.G. (2007). Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures. J Compo Part B: Eng, 38(2), pp. 119–143.
7
[8] Yost, J.R., Gross, S.P., and Dinehart, D.W. (2004). Near surface mounted CFRP reinforcement for structural retrofit of concrete flexural members. In: 4th Int. Conf. on Advanced Composite Materials in Bridges and Structures, Calgary, Canada.
8
[9] Barros, J.A., and Fortes, A.S. (2005). Flexural strengthening of concrete beams with CFRP laminates bonded into slits. Cement and Concrete Composites,27(4), pp. 471-480.
9
[10] Badawi, M., and Soudki, K. (2009). Fatigue behavior of RC beams strengthened with NSM CFRP rods. Journal of Composites for Construction, 13(5), pp. 415-421.
10
[11] Tang, W.C., Balendran, R.V., Nadeem, A., and Leung, H.Y. (2006). Flexural strengthening of reinforced lightweight polystyrene aggregate concrete beams with near-surface mounted GFRP bars. Building and environment, 41(10), pp. 1381-1393.
11
[12] Perera, R., Tarazona, D., Ruiz, A., and Martín, A. (2014). Application of artificial intelligence techniques to predict the performance of RC beams shear strengthened with NSM FRP rods: Formulation of design equations. Composites Part B: Engineering, 66, pp. 162-173.
12
[13] Capozucca, R. (2013). Analysis of bond-slip effects in RC beams strengthened with NSM CFRP rods. Composite Structures, 102, pp. 110-123.
13
[14] Wahab, N., Soudki, K.A., and Topper, T. (2010). Mechanism of bond behavior of concrete beams strengthened with near-surface-mounted CFRP rods. Journal of Composites for Construction, 15(1), pp. 85-92.
14
[15] Al-Mahmoud, F., Castel, A., François, R., and Tourneur, C. (2009). Strengthening of RC members with near-surface mounted CFRP rods. Composite Structures, 91(2), pp. 138-147.
15
[16] Teng, J.G., De Lorenzis, L., Wang, B., Li, R., Wong, T.N., and Lam, L. (2006). Debonding failures of RC beams strengthened with near surface mounted CFRP strips. Journal of composites for construction, 10(2), pp. 92-105.
16
[17] Singh, S.B., Reddy, A.L., and Khatri, C.P. (2013). Experimental and Parametric Investigation of Response of NSM CFRP-Strengthened RC Beams. Journal of Composites for Construction, 18(1).
17
[18] Jung, W.T., Park, Y.H., Park, J.S., Kang, J.Y., and You, Y.J. (2005). Experimental investigation on flexural behavior of RC beams strengthened by NSM CFRP reinforcements. In: 7th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, FRPRCS-7, pp. 7-10.
18
[19] Almusallam, T.H., Elsanadedy, H.M., Al-Salloum, Y.A., and Alsayed, S.H. (2013). Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars. Construction and Building Materials, 40, pp. 145-161.
19
[20] De Lorenzis, L., and Nanni, A. (2002). Bond between near-surface mounted fiber-reinforced polymer rods and concrete in structural strengthening. ACI structural Journal, 99(2), pp. 123-132.
20
[21] Soliman, S.M., El-Salakawy, E., and Benmokrane, B. (2008). Flexural behaviour of concrete beams strengthened with near surface mounted FRP bars. In: 4th International Conference on FRP Composites in Civil Engineering, CICE2008, pp. 22-24.
21
[22] Ceroni, F. (2010). Experimental performances of RC beams strengthened with FRP materials. Construction and Building Materials, 24(2), pp. 1547-1559.
22
[23] Sharaky, I.A., Torres, L., Comas, J., and Barris, C. (2014). Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars. Composite Structures, 109, pp. 8-22.
23
[24] Täljsten, B., Carolin, A., and Nordin, H. (2003). Concrete structures strengthened with near surface mounted reinforcement of CFRP. Advances in structural engineering, 6(3). pp. 201-213.
24
[25] Al-Mahmoud, F., Castel A. and Françoi, R. (2012). Failure modes and failure mechanisms of RC members strengthened by NSM CFRP composites – Analysis of pull-out failure mode. Composites: Part B, 43(4), pp. 1893–1901.
25
[26] Hassan T and Rizkalla S. (2004). Bond mechanism of NSM FRP for flexural strengthening of concrete structures. ACI Struct J, 101(6), pp. 830–839.
26
ORIGINAL_ARTICLE
ارزیابی رفتار سازه ای پایه های بتنی شبکه توزیع برق
خطوط شبکه توزیع برق یکی از مراحل رسیدن برق از تولید کننده به مصرف کننده میباشد که طراحی اصولی آن، موجب پایداری شبکه و جلوگیری از تحمیل هزینه های اضافه میشود. یکی از پرکاربردترین اجزاء شبکه توزیع برق، پایه های بتنی H شکل می باشد که عملکرد مطلوب سازه ای آنها از اهمیت ویژه ای برخوردار است. در این مقاله، ضمن ارائه و بررسی نتایج آزمایش در مقیاس واقعی بر روی پایه های متداول مورد استفاده در شبکه های توزیع برق (پایه 12 متری با قدرت اسمی400 کیلوگرم)، به بررسی عددی آن با استفاده از برنامه ی اجزای محدود آباکوس پرداخته شده است و نحوه شکست و ضریب رفتار لرزه ای در آن مورد بررسی قرار گرفته است. به منظور ایجاد شرایط واقعی برای بتن پایه از روش پلاستیسیته بتن خسارت دیده و از قید مدفون سازی نیز جهت ارتباط بتن و میلگرد استفاده شده است. مقایسه نتایج عددی و آزمایشگاهی، بیانگر انطباق مناسب مدل عددی با نتایج آزمایشگاهی است. نتایج بررسیهای صورت گرفته، نشانگر ظرفیت بالاتر پایه های موجود از ظرفیت ارائه شده در آیین نامه ایران میباشد. ضریب رفتار بدست آمده نیز، بیانگر شکل پذیری مناسب این پایه ها بوده و نشان می دهد که مقادیر توصیه شده توسط آیین نامه میتواند بصورت قابل ملاحظه ای افزایش یابند؛ این موضوع، میتواند باعث استفاده از پایه های با ظرفیت کمتر شود که در نهایت کاهش هزینه های احداث شبکه های توزیع برق کشور را در پی خواهد داشت.
https://www.jsce.ir/article_44439_29b064c5405c638e1869b39889a8de86.pdf
2017-12-22
29
41
10.22065/jsce.2017.44439
شبکه توزیع برق
پایه های بتنی
اجزا محدود
ضریب رفتار
مهران
زینلیان
m.zeynalian@eng.ui.ac.ir
1
استادیار، دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان، ایران
LEAD_AUTHOR
مهرداد
زمانی خوراسگانی
2
کارشناس ارشد مهندسی عمران، دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان، ایران
AUTHOR
[1] Iran Power Generation, Transmission and Distribution Company (Tavanir). (2011). Technical Requirements and Evaluation Criteria for Square Reinforced Concrete Poles. Tehran: Tavanir, 39.
1
[2] Mosavi, M. et al. (2013). Determination of Parameters of Plastic Damage Model for Concrete in Numerical Modeling of Reinforced Concrete Frame. In: 7th national congress on civil engineering. Zahedan, Iran.
2
[3] Kmiecik, P. and Kaminski, M. (2011). Modelling of Reinforced Concrete Structures and Composite Structures with Concrete Strength Degradation Taken into Consideration. Archives of Civil and Mechanical Engineering, 11(3), 623-636.
3
[4] Ahani, A. et al. (2012). Comparison between the Concrete Damage Plasticity and Concrete Smeared Crack in the modelling of reinforced concrete frame with masonry infill. In: 2nd national conference on Structure, Earthquake and Geotechnics. Babolsar, Iran.
4
[5] Geological Society Publications Online. Available at: http://sp.lyellcollection.org/content/282/1/457/F2.expansion [Accessed 23 Des. 2016].
5
[6] Mameghani, M. et al. (2013). Study of Plasticity Parameters in Numerical Cracks Concrete Modeling. In: International Conference on civil engineering, architecture & urban sustainable development. Tabriz, Iran.
6
[7] Hibbitt, Karlsson & Sorensen, Inc. (2012). Abaqus Theory and User’s Manual.
7
[8] Simulia. Concrete Damaged Plasticity. Abaqus Analysis User's Manual.
8
[9] Iran National Building Regulations. (2014). Design and construction of reinforced concrete (No. 9).
9
[10] Shim, W. and Vecchio, F.J. (2004). Experimental and Analytical Examination of Classic Concrete Beam Tests. Structural engineering, 130, 460-469.
10
[11] Permanent Committee for Revising the Iranian Code of practice for Seismic Resistant Design of Building., (2015). Iranian code of practice for seismic resistant Design of Building (Standard No. 2800).
11
[12] Zeynalian, M. and H. R. Ronagh. (2012). A Numerical Study on Seismic Performance of Strap-Braced Cold-Formed Steel Shear Walls. Thin-Walled Structures, 60, 229-23.
12
[13] FEMA-450 (2003). NEHRP recommended provisions for seismic regulations for new buildings and other structures - Part 1 Provisions. USA: Building Seismic Safety Council.
13
ORIGINAL_ARTICLE
مقایسه عملکرد قاب خمشی و قاب خمشی با مهاربند هم محور در سازه های بلند فولادی در اثر خرابی پیشرونده
سازه های فولادی تقریبا نیمی از سازه های موجود در دنیا را تشکیل می دهند. سیستم قاب خمشی فولادی و قاب خمشی فولادی بهمراه مهاربند همگرا دو نوع از سیستم های رایج و متداول فولادی هستند که بسیار مورد استفاده قرار می گیرند. اکثر آیین نامه های مربوط به این سازه ها ضوابط بسیاری را برای مقابله در برابر نیروی زلزله بیان کرده اند ولی اشاره ای به طراحی این سازه ها در برابر بارهای دینامیکی آنی همچون انفجار و یا برخورد ماشین به آنها نکرده اند. در صورتی که عوامل ذکر شده باعث خرابی یکی از عناصر کلیدی سازه همچون ستون گردند ممکن است خرابی کلی یا بخشی از سازه را فراهم آورد. از این رو بررسی این سازه در برابر خرابی پیشرونده ضروری به نظر می رسد. در این مطالعه با استفاده از روش اجزای محدود و با بکار گیری نرم افزار Abaqus ساختمان 20 طبقه فولادی با دو نوع سیستم سازه ای و دو نوع سناریوی حذف ستون مورد ارزیابی قرار گرفت. نتایج عددی با استفاده از خروجی های آزمایشگاهی صحت سنجی گردید. نتایج این مطالعه نشان می دهد که سازه از نظر افزایش نیروی محوری و لنگر خمشی در حالت حذف ستون کناری نسبت به ستون گوشه بحرانی تر است. همچنین مشاهده گردید که تفاوت چندانی بین پاسخ سیستم های جانبی مختلف در برابر خرابی پیشرونده وجود ندارد. بار ستون های مجاور بعد از حذف ستون تقریبا دو برابر می شود، بنابراین برای مقابله با خرابی پیشرونده پیشنهاد می گردد ستون های سازه برای نیروی دو برابر ناشی از بارهای سرویس نیز کنترل گردد.
https://www.jsce.ir/article_46009_1ae0c721b10dd72a189ea52ab1e8f55a.pdf
2017-12-22
42
57
10.22065/jsce.2017.77865.1084
خرابی پیشرونده
ساختمان بلند مرتبه
سناریوی حذف ستون
خرابی کششی
خرابی فشاری
روح اله
راه نورد
rahnavard1990@gmail.com
1
کارشناس ارشد مهندسی سازه، دانشکده مهندسی عمران، دانشگاه صنعتی جندی شاپور دزفول، دزفول، ایران
AUTHOR
نوید
سیاه پلو
n_siahpolo@yahoo.com
2
استادیار ، موسسه آموزش عالی جهاد دانشگاهی خوزستان، ایران
LEAD_AUTHOR
[1] GSA., (2003). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. The US General Services Administration.
1
[2] Unified Facilities Criteria (UFC)-DoD., (2205), Design of buildings to resist progressive collapse. Department of Defense.
2
[3] ASCE. SEI/ASCE 7-05,. (2005), minimum design loads for buildings and other structures. Washington DC: American Society of Civil Engineers.
3
[۴] پورسردار، ح، راه نورد، ر، ایزدی نیا، م،. (1394)، بررسی رویکرد ها و روش های آیین نامه ای طراحی در برابر خرابی پیشرونده براساس آیین نامه UFC، تهران، کنفرانس بین المللی دستاورد های نوین در عمران، معماری، محیط زیست و مدیریت شهری.
4
[5] Feng Fu., (2012), Response of a multi-story steel composite building with concentric bracing under consecutive column removal scenarios, Journal of Constructional Steel Research 70, 115–126.
5
[6] Feng Fu., (2013), Dynamic response and robustness of tall buildings under blast loading, Journal of Constructional Steel Research 80, 299–307.
6
[7] Feng Fu., (2009), Progressive collapse analysis of high-rise building with 3-D finite element modeling method, Journal of Constructional Steel Research 65, 1269_1278.
7
[8] Fu Feng, Lam Dennis, (2008)., Ye Jianqiao. Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region, Journal of Constructional Steel Research, 64(12):1408_19.
8
[9] Fu Feng, Lam Dennis., (2006), Experimental study on semi-rigid composite joints with steel beams and precast hollowcore slabs, Journal of Constructional Steel Research, 62(8):771_82.
9
[10] Abaqus, Abaqus/standard, (2012) version 6.11, ABAQUS, Inc., Pawtucket, R.I,.
10
[11] ETABS theory manual., (2008), Version 9.2.0. Copyright Computers and Structures, Inc.
11
[12] ACI 332-08., (2008). Code requirements for residential concrete and commentary. American Concrete Institute.
12
[13] Albolhassan Astaneh-Asl, Samuel Tan., (2003), CABLE-BASED RETROFIT OF STEEL BUILDING FLOORS TO PREVENT PROGRESSIVE COLLAPSE, University of California, Berkeley, REPORT NUMBER: UCB/CEE-STEEL-2003/02.
13
[14] Izzuddin BA, Vlassis AG, Elghazouli AY, Nethercot DA., (2008), Progressive collapse of multi-storey buildings due to sudden column loss_Part I: Simplified assessment framework. Engineering Structures, 30(5):1308_18.
14
[15] Vlassis AG, Izzuddin BA, Elghazouli AY, Nethercot DA., (2008), Progressive collapse of multi-storey buildings due to sudden column loss_Part II: Application. Engineering Structures, 30(5):1424_38.
15
[16] Khandelwal Kapil, El-Tawil Sherif, Sadek Fahim., Progressive collapse analysis of seismically designed steel braced frames. Journal of Constructional Steel Research, 65(3):699_708.
16
[17] Seonwoong Kim, Cheol-Ho Lee, Kyungkoo Lee., (2015), Effects of floor slab on progressive collapse resistance of steel moment frames, Journal of Constructional Steel Research 110, 182–190.
17
[18] P.M. Stylianidis, D.A. Nethercot., (2015), Modelling of connection behaviour for progressive collapse analysis, Journal of Constructional Steel Research 113, 169–184.
18
[19] Menglu Li, Mehrdad Sasani, (2015), Integrity and progressive collapse resistance of RC structures with ordinary and special moment frames, Engineering Structures 95, 71–79.
19
[20] Tsai Meng-Hao, Lin Bing-Hui., (2008), Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure. Engineering Structures, 30(12):3619_28.
20
[۲۱] راه نورد، ر، حسنی پور، ا. (1395). تحلیل سازه های فولادی با استفاده از ABAQUS. انتشارات جهاد دانشگاهی کرمان، صفحه 550 تا 630.
21
ORIGINAL_ARTICLE
ارزیابی احتمالاتی خسارات لرزهای سازه های بتن آرمه شمال ایران با استفاده از منحنیهای شکنندگی
در این مقاله منحنیهای شکنندگی سازههای بتنی 3، 5 و 8 طبقهی ایران بررسی شده است. سازههایی که در این مقاله مورد ارزیابی قرار گرفتند، دارای سیستم قاب خمشی بتنی با شکل پذیری متوسط میباشند، که طبق آییننامه 2800 (ویرایش سوم) طراحی شدند. این مدل ها به صورت 3 بعدی در نرم افزار OpenSEES تحت 20 رکورد دور از گسل آییننامه FEMA P695 ، که هر یک از g1/0 تا g5/1 مقیاس گردیدند، تحلیل دینامیکی فزاینده شدند و منحنیهای IDA برای سه تیپ سازه مورد مطالعه ترسیم گردید. سپس با استفاده از نرم افزار MATLAB و در نظر گرفتن توزیع احتمالاتی لوگ-نرمال احتمال شکست در هر سطح عملکرد محاسبه گردید. سرانجام منحنیهای شکنندگی برای حداکثر تغییرمکان بین طبقهای در سطوح مختلف PGA ترسیم شد. نتایج حاکی از آن است که در مقایسه رفتار سازه با ارتفاعهای متفاوت، میتوان گفت که با افزایش ارتفاع، سازه زودتر وارد ناحیۀ غیرخطی شده و ظرفیت سازه کاهش مییابد. به طور کلی با افزایش ارتفاع سازه، آسیبپذیری سازه در چهار سطح خرابی مشخص شده (خرابی کم، متوسط، زیاد و کامل) افزایش مییابد ولی روند افزایش احتمال خرابی، کم و کمتر میگردد. احتمال خرابی کامل ساختمان در زلزله طرح (زلزله سطح خطر 1) نزدیک به صفر و احتمال خرابی زیاد نیز ناچیز می باشد، که با هدف طراحی آیین نامه 2800 که حفظ ایمنی جانی افراد و به حداقل رساندن تلفات جانی است، مطابقت دارد. در واقع سازه پایداری خود را بعد از زلزله سطح خطر 1 حفظ می نماید.
https://www.jsce.ir/article_46010_d2d86de0194bd0290c3a603c0cd85758.pdf
2017-12-22
58
78
10.22065/jsce.2017.78827.1095
منحنی شکنندگی
آسیب پذیری
ارزیابی احتمالاتی
ساختمانهای بتن آرمه
تحلیل IDA
علی
ناصری
eng_alinaseri@yahoo.com
1
دانشجوی دکتری مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
LEAD_AUTHOR
حسین
پهلوان
pahlavan@shahroodut.ac.ir
2
استادیار، دانشگاه صنعتی شاهرود، شاهرود، ایران
AUTHOR
غلامرضا
قدرتی امیری
ghodrati@iust.ac.ir
3
استاد، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
AUTHOR
[1] Akkar, S.; Sucuoglu, H. and Yakut, A. (2005), “Displacement based fragility functions for low- and mid-rise ordinary concrete buildings", Earthquake Spectra, 21(4), pp. 901-927.
1
[2] Anagnos, T.; Rojahn, C. and Kiremidjian, A.S. (1994). “Building fragility relationships for California", Proceedings of the Fifth U.S. National Conference on Earthquake Engi Engineering, pp. 389-396
2
[3] Kennedy, R.P.; Cornell, A.C.; Campbell, R.D.; Kaplan, S. and Perla, H.F. (1980). “Probabilistic seismic safety study of an existing nuclear power plant", Nuclear Eng. & Design, 59(2).
3
[4] Kircher , C.A. and Martin W, " Development of fragility Curve for Estimating of Earthquake Damage Work Shopon Continuing Action to Reduce losses from Earthquake , Washington ,Dc : U.S.Geological Survey. (1993).
4
[5] Anagnos, T.; Rojahn, C. and Kiremidjian, A.S. “Building fragility relationships for California”, Proceedings of the Fifth U.S. National Conference on Earthquake Engineering, pp. 389-396 (1994).
5
[6] Anagnos , T.Rojahn , C.and Kiremidjiam, “ATC joint Study on Fragility Of Building",NCEER-95-0003, Applied Technology Council ,CA.(1995).
6
[7] Satoshi TANAKA, Hiroyuki KAMEDA, Nobuoto NOJIMA, Shunsuke OHNISHI, (2000). “Evalution of Seismic Fragility for Highway Transportation System”, publisher:12WCEE.
7
[8] Murao, O. and Yamazaki, F. “Development of fragility curves for buildings in Japan”, Confronting Urban Earthquakes: Report of Fundamental Research on theMitigation of Urban Disasters Caused by Near-Field Earthquakes, pp. 226-230 (2000).
8
[9] Smyth, A. “Probabilistic bene_t-cost analysis for earthquake damage mitigation: Evaluating measures for apartment houses in Turkey", Earthquake Spectra, 20(1), (February 2004).
9
[10] Aziminejad, A.S. and Moghadam,A. (June 2007). “Effects of strength distribution on fragility curves of asymmetric single story building”, Proceedings of the Ninth Canadian Conference on Earthquake Engineering Ottawa, Ontario, Canada.
10
[11] Mohammad Barkhordary And Saeed Tariverdilo , (2011) 10 , “Vulnerability of ordinary moment resistant concrete frames” , Earthq Eng & Eng Vib , pp. 519-533
11
[12] Mark Adom-Asamoah, (16 May, 2012), “Generation of analytical fragility curves for Ghanaian non-ductile reinforced concrete frame buildings”, International Journal of the Physical Sciences Vol. 7(19), pp. 2735-2744.
12
[13] Frank J. Vecchio; Mohamed Basil Emara; “Shear Deformation in Reinforced Concrete Frames”; ACI Structural Journal ;V 89, No 1 , 1992
13
[14] Standard No.2800-05. (2005). “Iranian code of practice for seismic resistant design of buildings.” Third ed., Building and Housing Research Center, BHRC publication, Tehran, Iran
14
[15] Office of National Building Regulations. (2009). “Topic ninth national building regulations.” Design and implementation of concrete buildings, Tehran, Iran.
15
[16] HAZUS-MH MR5, Multi-Hazard loss Estimation Methodology: Earthquake Model. (2003), Depariment of Homeland security, FEMA, Washington, D.C,
16
[17] Mazzoni, S; McKenna, F; Scott, M.H; Fenves, G.L; & Jeremic B; (2007). “OpenSEES Command Language Manual”.
17
[18] Elnashai, A.S., Pinho, R. and Antoniou (2000), “INDYAS – A Program for Inelastic Dynamic Analysis of Structures,” Research Report ESEE/00-2, Engineering Seismology and Earthquake Engineering Section, Imperial College, London.
18
[19] Mander J.B., Priestley M.J.N., Park R. (1988). “Theoretical Stress-Strain Model for Confined Concrete”. Journal of Structural Engineering, publisher: ASCE.
19
[20] Shome N, Cornell CA, (1999). Probability seismic demand analysis of nonlinear structures Ph.D, dissertation. Stanford University.
20
[21] FEMA. Quantification of building seismic performance factors. FEMA P695. (June 2009), Federal Emergency Management Agency, Washington, DC.
21
[22] Nielson, B.G, (2005). “Analytical Fragility curves for highway bridges bridges in moderate seismic zones”, A Thesis presented for PHD degree. School of civil and environmental engineering Georgia institute of Technology, 400 pp,
22
[23] Cornell, A. C., Jayaler, F., Hamburger, R. O., and Foutch, A. D. (2002). “Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines.” J. Struct. Eng., 10.1061/ (ASCE)0733-9445(2002)128:4(526), 526–533
23
[24] Code No. 360, 2007, Islamic Republic of Iran, Management and Planning Organization, Instruction for Seismic Rehabilitation of Existing Buildings.
24
[25] Abdollahzadeh, G., & Shahaky, M. (2011). Probabilistic seismic hazard assessment of Babol, Iran. Iranian Journal of Energy & Environment, 2, 274-285.
25
[26] Pahlavan, H., Zakeri, B., Amiri, G. G., & Shaianfar, M. (2015). Probabilistic vulnerability assessment of horizontally curved multiframe RC box-girder highway bridges. Journal of Performance of Constructed Facilities, 30(3), 04015038.
26
ORIGINAL_ARTICLE
تخمین مقاومت برشی تیرهای بتن آرمه مسلح به الیاف پلیمری؛ مقایسه شبکه عصبی مصنوعی و روابط آیین نامه ای
در سالهای اخیر آزمایشات تجربی متعددی در خصوص تقویت برشی تیرهای بتن آرمه مسلح به الیاف پلیمری صورت گرفته است. در این راستا روابطی نیز برای تخمین مقاومت برشی تیرهای مسلح به الیاف پلیمری ارائه شده است. هدف از این مطالعه بررسی تخمین مقاومت برشی تیرهای مسلح به الیاف پلیمری بوسیله مدل شبکه عصبی مصنوعی پیش خور است. برای این منظور یک پایگاه داده متشکل از 304 تیر بتنآرمه مسلح به الیاف پلیمری جهت ارزیابی رفتار برشی، از نتایج تجزیه و تحلیل مقالات موجود گردآوری شده است. متغیرهای ورودی مدل شبکه عصبی شامل 11 متغیر دربرگیرنده مشخصات هندسی مقطع، میزان آرماتور، میزان الیاف پلیمری و مشخصات مصالح بتن و فولاد و الیاف پلیمری است و متغیر خروجی مقاومت برشی تیر است. بمنظور ارزیابی کارایی مدل شبکه عصبی در تخمین میزان ظرفیت برشی تیرهای تقویت شده، نتایج کسب شده از مدل شبکه عصبی با مقادیر روابط آیین نامه بتن ایران (نشریه 345) و آیین نامه بتن امریکا (ACI440) مقایسه میشود. مقایسه نتایج نشان می دهد که در مجموع دقت مدل شبکه عصبی نسبت به دقت هر دو آییننامه بیشتر است. بطور مشخص برای داده های مورد بررسی، درصد میانگین نسبی مطلق خطای برآورد در مدل شبکه عصبی 13 درصد، آیین نامه امریکا 34 درصد و آیین نامه ایران 39 درصد است.
https://www.jsce.ir/article_46011_8734b9b6df26cf55dd2c339fc58ae399.pdf
2017-12-22
79
97
10.22065/jsce.2017.80891.1141
تیر بتنی
پلیمرهای مسلح شده با الیاف
مقاومت برشی
شبکه عصبی مصنوعی
نشریه 345
ACI440
محمود
اکبری
makbari@kashanu.ac.ir
1
استادیار، دانشکده مهندسی، دانشگاه کاشان، کاشان، ایران
LEAD_AUTHOR
وحید
جعفری دلیگانی
vahidjafari71@gmail.com
2
دانشجوی کارشناسی ارشد مهندسی سازه، دانشکده مهندسی، دانشگاه کاشان، کاشان، ایران
AUTHOR
حمید
نظامی نیا
hnezaminia@gmail.com
3
کارشناس ارشد مهندسی سازه، دانشکده مهندسی، دانشگاه کاشان، کاشان، ایران
AUTHOR
[1] Noel, M. and Soudki, K..(2011) Evaluation of FRP posttensioned slab bridge strips using AASHTO-LRFD Bridge design specifications. Journal of Bridge Engineering, Vol. 16, pp. 839-846.
1
[2] Esfahani, M R., Kianoush, M R., Tajari(2007) Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets. Engineering Structures. No. 29, pp. 2428–-2444.
2
[3] Mabsout, M., Tarhini, K., Jabakhanji R and Awwad E.(2004) Wheel load distribution in simply supported concrete slab bridges. Journal of Bridge Engineering, Vol. 9, No. 2, pp. 147-155.
3
[4] Gamino, A. L., Sousa, J. L. A. O., Manzoli O. L. and Bittencourt, T. N.(2010) R/C Structures strengthened with CFRP Part II: Analysis of shear models. IBRACON Struct. Mater. J., Vol. 3, No. 1, pp. 24 – 49.
4
[5] Sobuz, H. R., Ahmed, E., Hasan, N. M. S., and Uddin M, A (2011). Use of carbon fiber laminates for strengthening reinforced concrete beams in bending. International Journal of Civil and Structural Engimeering. Vol. 2, No. 1, pp. 89-102.
5
[6] Shahawy, M A., Arockiasamy, Beitelmant T. (2010). Reinforced concrete rectangular beams strengthened with CFRP laminates. Composites: Part B: Engineering, Vol. 27, No. 3-4, pp. 225-233.
6
[7] Rahimi, Allan Hutchinson (2001). Concrete beams strengthened with externally bonded FRP plastes. Journal of Composites for Construction, Vol. 5, No. 1, pp. 59-68.
7
[8] Abdel-Jaber, M. S., Walker, P. R., and Hutchinson, A. R. (2003). Shear strengthening of reinforced concrete beams using different configurations of externally bonded carbon fiber reinforced plates. Materials and Structures/Materiaux et Constructions, Vol. 36, pp. 291-301.
8
[9] American Concrete Institute, ACI 440.2R, (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structure. Farmington Hills, Mich: ACI Committee 440.
9
[10] Publication No. 345, (2006). The guideline for design specification of strengthening RC buildings using fiber reinforced polymers (FRP).Office of Technical Affairs Deputy Technical, Criteria Codification and Earthquake Risk Reduction Affairs Bureau.
10
[11] Fib bulletin 14(2001). Externally bonded FRP reinforcement for RC structures, design and use of externally bonded fibre reinforced polymer reinforcement (FRP EBR) for reinforced concrete structures. Technical Report, Lausanne, Switzerland: The International Federation for Structural Concrete
11
[12] JSCE Guidelines for Concrete, Standard specifatons for concrete strucores (2007). Materials and Construction.
12
[13] Japan Concrete Institute.
13
[14] Railway Technical Research Institute (1994-2017).
14
[15] Standards Council of Canada, (2016). 55 Metcalfe Street, Suite 600, Ottawa, ON K1P 6L5 Canada.
15
[16] Taljsten, Bjorn (2003). Strengthening concrete beams for shear with CFRP sheets. Constr. Build. Mater. Vol. 17, No. 1, pp. 16-27.
16
[17] Khalifa, A., A Nanni (2002). Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites. Construction and Building materials, Vol. 16, No. 3, pp. 135-146.
17
[18] Triantafillou, T. C, و C. P Antonopoulos (2001). Design of concrete flexural members strengthened in shear with FRP.” J. Compos. Constr., Vol. 4, No. 4, pp.198-205.
18
[19] Zhang., Zhichao, Hsu, Cheng-Tzu. Thomas. And Moren, J (2004). Shear strengthening of reinforced concrete deep beams using carbon fiber reinforced polymer laminates. Journal of Composites for Construction, Vol. 8, No. 5. pp. 398-412.
19
[20] Chaallal, O., Nollet, M. J.,,Perraton, D., (1988). Shear strengthening of RC beams by externally bonded side CFRP strips J. Compos. Constr., Vol. 2, No. 2, pp.111–113.
20
[21] Triantafillou, T.C., Plevris, N., (1992). Strengthening of RC beams with epoxy-bonded fibre-composite materials. MaterialsandStructures, NO. 25, pp. 211-219.
21
[22] Taerwe, ed. (1995). Non-Metallic (FRP) Reinforcement for concrete structures. Proceedings of the Second International RILEM Symposium (FRPRCS-2). pp. 169-181.
22
[23] Sayed, AM., Wang, X., and Wu, Z. (2013). Modeling of shear capacity of RC beams strengthened with FRP sheets based on FE simulation. J. Compos. Constr., Vol. 17, No. 5, pp. 687-701.
23
[24] Norris, T., Saadatmanesh, H. and Ehsani, M. R (1997). Shear and flexural strengthening of R/C beams with carbon fiber sheets. J. Struct. Eng., Vol. 123, No. 7, pp. 903-911.
24
[25] Kobayashi, K., Kanakubo, T. & Jinno, Y (2007). Seismic retrofit of structures using carbon fibres. s.l., s.n., pp. 1-21.
25
[26] El-Maaddawy, T., A. Chahrour, K. A and Soudki (2006). Effect of FRP-wraps on corrosion activity and concrete cracking in chloride-contaminated concrete cylinders. Journal of Composites for Construction, Vol. 10, No. 2, pp. 139-147.
26
[27] Chajes, M. J., Thomson Jr, T. A., Januszka, T. F., and Finch Jr, W. W (1994). Flexural strengthening of concrete beams using externally bonded composite materials. Construction and Building Materials. Vol. 8 NO. 3, pp. 48-57.
27
[28] Carolin, A, و B Taljsten (2005). Experimental study of strengthening for increased shear bearing capacity. Journal of Composites for Construction, Vol. 9, No. 6, pp. 27-39.
28
[29] Chen, J F., J G Teng (2003). Shear capacity of FRP-strengthened RC beams: FRP debonding. Construction and Building Materials, No. 17, pp. 27-41.
29
[30] Arduini, M, و A Nanni (1997). Behavior of pre-cracked RC beams strengthened with carbon FRP sheets. Journal of Composites in Construction, Vol. 1, No. 2, pp. 63-70.
30
[31] Lu, X. Z., Teng, J. G., Ye, L. P. & Jiang, J. J. (2007). Intermediate crack debonding in FRP-strengthened RC beams: FE Analysis and Strength Model. Journal of Composites for Construction, Vol. 11, No. 2, pp. 161-174.
31
[32] Teng, J. G., Chen, G. M., Chen, J. F., Rosenboom, O. A. and Lam, L (2009). Behavior of RC beams shear strengthened with bonded or behavior of RC beams shear strengthened with bonded. Journal of Composites for Construction, Vol. 13, No. 5, pp. 248-260.
32
[33] Sundarraja, C. M., and Rajamohan, S (2009). Strengthening of RC beams in shear using GFRP inclined strips – An experimental study. Construction and Building Materials, No. 8, pp. 856-864.
33
[34] Stergiou, Christos, و Dimitrios Siganos (2008). Neural Networks180 Queen's Gate, London SW7 2BZ, UK: SURPRISE Journal volume 4. Imperial College of Science Technology and Medicine.
34
[35] MathWorks Inc (2013). MatLab the language of technical computing. Natick, MA, USA: MathWorks Inc; Version R2013b.
35
[36] Tanarslan, H. M., Ertutar, Y. and Altin, S (2008). The effects of CFRP strips for improving shear capacity of RC beam. Journal of Reinforced Plastics and Composites, Vol. 27, No. 12, pp. 1269-1285.
36
[37] Adhikary, Babu, B., Mutsuyoshi, H., (2004). Behavior of concrete beams strengthened in shear with carbon-fiber sheets. Journal of Composites for Construction, Vol. 8, No. 3, pp. 271-285.
37
[38] Bousselham, A., and Chaallal, O (2006). Effect of transverse steel and shear span on the performance of RC beams strengthened in shear with CFRP. Compos. Part B, Vol. 37, No. 1, pp. 37-46.
38
[39] Ianniruberto, U, Imbimbo, M., (2004). Role of fiber reinforced plastic sheets in shear response of reinforced concrete beams: Experimental and analytical results. J. Compos. Constr., Vol. 8, No. 5, pp. 218-425.
39
[40] Beber, A. J., and Filho, A. C. (2005). CFRP composites on the shear strengthening of reinforced concrete beams. Ibracon Struct. J., Vol. 1, No. 2, pp. 128-134.
40
[41] Pellegrino, C. and Modena, C (2008). An experimentally based analytical model for the shear capacity of FRP-stregth ended reinforced concrete beam. Mechanics of Composite Materials, Vol. 44, No. 3, pp.103-112.
41
[42] Monti, G., Menegotto, M. & Littoa, M. A (2009). Modelling shear mechanism INFRP- strenghed R/C beam. Architecture Civil Engineering Envirinment
42
[43] Diagana, C., Li, A., Gedalia, B., and Delmas, Y (2003). Shear strengthening effectiveness with CFF strips. Eng. Struct. Vol. 25, No. 4, pp. 507-516.
43
[44] Bukhari, A. I., Vollum, R., Ahmad, S., Sagaseta, J (2013). Shear strengthening of short span reinforced concrete beams with CFRP sheets. Arabian Journal for Science and Engineering. Vol. 38, No. 3, pp. 523-536.
44
[45] Mofidi, A., Thivierge, S., Chaallal, O. and Shao, Y (2014). Behavior of reinforced concrete beams strengthened in shear using L-shaped CFRP plates: experimental investigation. J. Compos. Constr. No.6, pp. 314-329.
45
[46] Singh, B. S (2013). Shear response and design of RC beams strengthened using CFRP laminates. International Journal of Advanced Structural Engineering. No. 5, pp. 86-98.
46
[47] Cao, S. Y., Chen, J. F., Teng, J. G., Hao, Z., and Chen, J (2005). Debonding in RC beams shear strengthened with complete FRP wraps. Journal of Composites for Construction, Vol. 9, No. 5. pp. 217-428.
47
[48] Li, L. J., Guo, Y. C., Liu, F. and Bungey, J. H (2005). An experimental and numerical study of the effect of thickness and length of CFRP on performance of repaired reinforced concrete beams. Construction and Building Materials, No. 20, pp. 901-909.
48
[49] Alzate, A., Arteaga, A., de Diego, A., Cisneros, D., and Perera, R (2013). Shear strengthening of reinforced concrete members with CFRP sheets. Materiales de Construcción, Vol. 63, No. 10, pp. 251-265.
49
[50] Umezu, K., Fujita, M., Nakai, H. and Tamaki, K. (1997). Shear behavior of RC beams with aramid fiber sheet. Proc. 3rd Symp. on Non Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 1, pp. 491-498.
50
[51] Ozden, S., Atalay, M. H., Akpinar, E., Erdogan, H., and Vulas, Z. Y (2014). Shear strengthening of reinforced concrete T-beams with fully or partially bonded fibre-reinforced polymer composites. Structural Concrete, Vol. 15, No. 2, pp. 14-27.
51
[52] Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M. and Parke, G. A. R. (1998). An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams. Construction and Building Materials, No. 12, pp. 203-219.
52
[53] Ozden, S., Atalay, M. H., Akpinar, E., Erdogan, H., and Vulas, Z. Y (2014). Shear strengthening of reinforced concrete T-beams with fully or partially bonded fibre-reinforced polymer composites. Structural Concrete, Vol.15, No. 2, pp. 1-19.
53
[54] Panda, K. C., Bhattacharyya, S. K. and Barai, S. V (2011). Shear strengthening of RC T-beams with externally side bonded GFRP sheet. Journal of Reinforced Plastics and Composites, No16., pp. 1139-1154.
54
[55] Kim, G., Sim, J. and Oh, H. (2008). Shear strength of strengthened RC beams with FRPs in shear. Construction and Building Materials, No.22. pp. 1261-1270.
55
[56] Islam, M. R., Mansur, M. A. and Maalej, M. (2005). Shear strengthening of RC deep beams using externally bonded FRP systems. Cement & Concrete Composites, No. 27, pp. 413-420.
56
[57] Manos, G. C., Kourtides, V. and Matsukas, P. (2007). Investigation of the flexural and shear capacity of simple R/C beam specimens including repair schemes with fiber reinforced plastics. Proceedings of the eighth international symposium on fibre-reinforced polymer (FRP) reinforcement for concrete structures (FRPRCS-8). No. 129, pp.16-28.
57
[58] Sundarraja, C. M., and Rajamohan, S. (2009). Strengthening of RC beams in shear using GFRP inclined strips – An experimental study. Construction and Building Materials, No.4, pp. 856-564.
58
ORIGINAL_ARTICLE
تحلیل استاتیکی غیرخطی قابهای فولادی با اتصال نیمهصلب با استفاده از مدل المان صلیبی
در بسیاری از طراحیها فرض میشود که اتصالات تیر به ستون در قاب فولادی حالت گیردار یا مفصلی دارند، با اینکه در بسیاری از حالات، این اتصالات، حالتی گیردار یا مفصلی نداشته و به شکل نیمهصلب (نیمهگیردار) رفتار میکنند. مطالعاتی که اخیراً صورت گرفته به همراه توصیههای آئیننامههای جدید، بالاخص یوروکد3 و یوروکد4، شامل روشها و فرمولهایی جهت محاسبه و برآورد میزان مقاومت و سختی چشمهی اتصال میباشند. با توجه به ضعفهای مدل اتصال یوروکد، بایو و همکاران روش جدیدی بر مبنای مولفههای اتصال جهت مدلسازی اتصالات نیمهصلب داخلی و خارجی ارائه کردند که به روش المان صلیبی معروف میباشد و ضعفهای روش یوروکد را مرتفع نموده است. مدلسازی غیرخطی نقش مهمی در تحلیل و طراحی سازهها ایفا میکند و تحلیل استاتیکی غیرخطی نیز یک روش نسبتاً ساده و موثر در تحلیل رفتاری سازه ها میباشد. در تحقیق پیش رو با استفاده از مدل اتصال صلیبی نیمهصلب و با استخراج یک ضریب غیرخطی اجزا، به تحلیل استاتیکی غیرخطی قابها، با دو نوع از اتصالات نیمهصلب شامل اتصال با ورق انتهایی و اتصال با نبشی نشیمن و فوقانی، در برابر دو نوع توزیع بارجانبی یکنواخت و مثلثی پرداخته میشود. نتایج گویای این مسئله است که قابهای دارای اتصال تیر به ستون با نبشی نشیمن و فوقانی نسبت به اتصال با ورق انتهایی از سختی اولیه کمتری برخوردار بوده و اثر P-Δ ظرفیت باربری آن را بیشتر کاهش داده و این کاهش ظرفیت با افزایش تعداد طبقات سازه افزایش مییابد.
https://www.jsce.ir/article_46675_f9baa79e32c41a236e25b8429edeea7a.pdf
2017-12-22
98
117
10.22065/jsce.2017.68957.1010
اتصال نیمه صلب
المان صلیبی
تحلیل استاتیکی غیرخطی
اتصال با ورق انتهایی
اتصال با نبشی نشیمن و فوقانی
وحیدرضا
افخمی
varafkhami@gmail.com
1
کارشناس ارشد مهندسی سازه، دانشکده فنی و مهندسی، دانشگاه هرمزگان، بندرعباس، ایران
AUTHOR
محمد طاهر
کمالی
kamali@hormozgan.ac.ir
2
دانشیار، دانشکده فنی و مهندسی، دانشگاه هرمزگان، بندرعباس، ایران
LEAD_AUTHOR
Frye,MJ. Morris,GA., “Analysis of flexibility connected steel frames,” Canadian Journal of Civil Engineering, pp. 82-91, 1975.
1
Toma,S. Chen, W.F., “Advanced Analysis of Steel Frames,” CRC Press, Inc, 1994.
2
AISC, Manual of Steel Construction, Load and Resistance Factor Design, Chicago, IL, 1994.
3
Bjorhorde,R. Colson,A. Zandonini,R., Connections in Steel Structures III, Bpcwheatons Ltd, 1996.
4
Bayo, E. Cabrero,J.M. Gil,B., “An effective component-based method to model semi-rigid connections,” Engineering Structures, vol. 28, pp. 97-108, 2006.
5
CEN. Eurocode 3: Design of steel structures, Part 1.8: Design of joints, 2003.
6
Weynand,K. Jaspart,J., Design of Structural Steel Joints, European Commission, 2014.
7
“SSEDTA. Eurocodes for composite structures. Structural steelwork Eurocodes development of a trans-national approach. Module 4: joints,” 2001.
8
McGuire,W. Gallagher,R. Ziemian, R., “Matrix structural analysis,” John Wiley, 2000.
9
Ahmed,E. Kishi,N. MATSUOKA,K. Komuro,M., “Nonlinear Analysis on Prying of Top and Seat-Angle Connections,” Journal of Applied Mechanics, vol. 4, pp. 227-236, 2001.
10
Kishi, N. Chen, W.F., “Steel Connection Data Bank Program,” Structural Engineering Report No. CE-STR-86-11, School of Civil Engineering, Purdue University, West Lafayette, Indiana, 1986.
11
Chen,W.F. Atsuta,T., Theory of beam-columns, Volume1, 2008.
12
“Federal Emergence Management Agency, Prestandard and commentary for the seismic rehabilitation of buildings,” Report FEMA-356, Washington.
13
Yongjiu,S. Gang,S. Yuanqing,W., “Behavior of end-plate moment connection under earthquake,” Engineering structures, vol. 29, pp. 703-716, 2007.
14
Fattouh,Elrahman. Shaker, M.F. M. Abd, Waseem., “Behavior of Flush and Extended End-Plate Beam-To-Column,” World Applied Sciences Journal, 2014.
15
CEN. Eurocode 4: Design of steel and concrete structures. Part 1.1: General rules and rules for buildings, 2003.
16
Abolmaali,A. Kukreti,A.R. Razavi,H., “Hysteresis behavior of semi-rigid double web angle steel connections,” Journal of Constructional Steel Research, 2003.
17
Chen, WF., “Practical analysis for semi-rigid frame design, World scientific, 2000.
18
ORIGINAL_ARTICLE
اثر اندرکنش خاک-سازه در رفتار لرزهای مجموعه سازه پدستال آنتنهای بشقابی بزرگ
با توجه به پیشرفت روزافزون فناوری فضایی در سطح جهان و نیز کشور ایران، طراحی و بهرهبرداری از تجهیزات مخابراتی جهت ارسال و دریافت اطلاعات در ایستگاههای زمینی مربوطه دارای اهمیت بسزایی میباشد. با پیشرفت هر چه بیشتر علوم مرتبط با فناوری فضایی از جمله مهندسی مخابرات و باتوجه به حساسیت بسیار زیاد آنتنهای بشقابی مورد استفاده در این خصوص، لازم است طراحی مربوط به سازههای مرتبط با این حوزه با دقت بیشتری نسبت به گذشته در دستور کار قرار گیرد. تاکنون در کشور بررسی و پژوهش مشخصی در خصوص این موضوع، خصوصاً تاثیر اندرکنش خاک-سازه جهت بررسی رفتار لرزهای و نیز جابهجایی مجاز برای سازههای مربوط به آنتنهای بشقابیبزرگ و نحوۀ صحیح محاسبه و اعمال بارهای گوناگون به سازه انجام نشده است؛ لذا در پژوهش حاضر که با هدف بررسی تاثیر اندرکنش خاک-سازه در رفتار لرزهای مجموعۀ سازۀ پدستال صورت گرفته، پس از محاسبه جابهجایی قابل قبول برای یک نمونۀ عملیاتی از آنتنهای مخابراتی (مهمترین عامل در بررسی عملکرد مناسب مجموعۀ سازۀ پدستال برای آنتن) در ابتدا در قالب مدلسازی همزمان مجموعۀ سازۀ پدستال آنتن و پی، با لحاظ نمودن اندرکنش خاک-سازه و نیز اعمال بارگذاری مربوطه به مجموعۀ سازه، جابهجایی حاصل شده در دو حالت عملیاتی و دوام، استخراج و در ادامه میزان اختلاف جابهجایی در حالات مذکور با جابهجایی حاصل از مدلسازی پدستال آنتن بدون درنظرگرفتن اندرکنش خاک-سازه مقایسه شده است. در نهایت با توجه به نتایج حاصله از مدلسازیهای انجام شده مشخص میگردد که اعمال اندرکنش خاک-سازه در حالت دوام بیش از 50 درصد و در حالت عملیاتی بیش از 500 درصد در جابهجایی اثرگذار میباشد.
https://www.jsce.ir/article_46676_da4b99db5c91a09c209a53bc61ef5819.pdf
2017-12-22
118
135
10.22065/jsce.2017.78895.1103
آنتن مخابراتی
پدستال
سازۀ حساس
جابهجایی مجاز
اندرکنش خاک-سازه
بهادر
پورحاتمی
b.pourhatami@yahoo.com
1
کارشناسی ارشد مهندسی زلزله، سازمان فضائی، تهران، ایران
AUTHOR
سید محمود
حسینی
hosseini@iiees.ac.ir
2
دانشیار، پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله، تهران، ایران
LEAD_AUTHOR
امیر
محمودزاده
amiramj1@yahoo.com
3
استادیار، گروه مهندسی عمران، واحد نجف آباد، دانشگاه آزاد اسلامی، اصفهان، ایران
AUTHOR
[1] Kiredron, K. Chain, C.T. (1985). Seismic Analysis of the Large 70-meter Antenna Part I. Pasadena: NASA. Available at: http://ipnpr.jpl.nasa.gov/progres_report/42-82/82D.PDF.
1
[2] Kiredron, K. Chain, C.T. (1985). Seismic Analysis of the Large 70-meter Antenna Part II. Pasadena: NASA. Available at: http://ipnpr.jpl.nasa.gov/progress_report/42-83/83B.PDF.
2
[3] Maral, G. Bousquet, M. (2009) Satellite Communications Systems Fifth Edition. West Sussex: A John Wiley and Sons Ltd Publication.
3
[4] TELECOMMUNICATIONS INDUSTRY ASSOCIATION., (2005). Structural Standard for Antenna Supporting Structures and Antennas, ANSI/TIA-222-G.Arlington: TELECOMMUNICATIONS INDUSTRY ASSOCIATION.
4
[5] TELECOMMUNICATIONS INDUSTR ASSOCIATION., (1996) Structural Standards for Steel Antenna Towers and Antenna Supporting Structures, TIA/EIA-222-F. Arlington: TELECOMMUNICATIONS INDUSTRY ASSOCIATION.
5
[6] Pattan, B. (1996) Satellite Systems Principles and Technologies. Springer
6
[7] Grace, D. Mohorci , M. (2011) Broadband Communications Via High-Altitude Platform. West Sussex: A John Wileyand Sons Ltd Publication, Pages: 292-311.
7
[8] Azhari, M. etc. (2014). Limit States Design of Steel Structures (LRFD ) (in Persian), Volume 5, Members Design. Isfahan: Arkan Danesh Publication.
8
[9] Research center of Roads, House & Urban Development., (2014). Seismic Code for Buildings Design (in Persian), Standard 2800.Forth Edition. Tehran: Research center of Roads, House &Urban Development.
9
[10] National Building Regulations Institute, (2013). National Building Regulations of Iran, Sixth Topic: Loads Design for Buildings (in Persian). Tehran: Tose’e Iran Publication.
10
[11] National Building Regulations Institute, (2013). National Building Regulations of Iran, Tenth Topic: Steel Structures Design (in Persian). Tehran: Tose’e Iran Publication.
11
[12] American Concrete Institute, (2014). Building Code Requirements for Structural Concrete, ACI 318-14.Farmington Hills: American Concrete Institute.
12
[13] NEHRP Consultants Joint Venture, (2012).Soil–Structure Interaction for Building Structures. Gaithersburg: National Institute of Standards and Technology.
13
[14] Pourhatami, Bahador, (2016), Guidelines for Design of Delicate Structures of Earth Stations of Space Payloads (in Persian), MSc Thesis submitted to Shakhes Pajouh Research Center on Natural Disasters Engineering.
14
[15] www.Satsig.net (accessed in February 21, 2017).
15
ORIGINAL_ARTICLE
بررسی مرز سنگدانه- خمیر سیمان در بتن های حاوی دوده سیلیسی و خاکستربادی
پیوستگی بین سنگدانه و خمیر سیمان موسوم به ناحیه انتقال میان سطحی (ITZ) از پارامترهای مهمی است که بر خواص مکانیکی و دوام بتن تاثیر میگذارد. ریزساختار ناحیه انتقال و تخلخل (حفرات) خمیر سیمان و بتن متاثر از نوع و خواص مصالح مصرفی است که بررسی آن از اهداف این تحقیق می باشد. از طرفی استفاده از روشهای کارآمد، کم هزینه و قابل اتکا برای ارزیابی عملکرد بتن در برابر نفوذ یون کلراید و رابطه آن با ناحیه انتقال، به عنوان معیار مناسب برای ارزیابی دوام، اهمیت ویژهای دارد. تاکنون روشهای مختلفی با رویکرد شاخصهای الکتریکی ارائه شده است. در این پژوهش، تاثیر مواد پوزولانی خاکستربادی (10%، 20% و 30%) و دوده سیلیسی (5% و 10%) به عنوان جایگزین با وزن سیمان به صورت مخلوطهای دوجزیی و سهجزیی، بر خواص بتن تازه و سخت شده مورد بررسی قرار گرفته است. از آزمایش های مقاومت فشاری، مقاومت کششی غیر مستقیم و مدول الاستیسیته برای ارزیابی خواص مکانیکی استفاده شد. همچنین برای ارزیابی دوام بتن، آزمایشهای عمق نفوذ آب، تخلخل، جذب آب موئینه، مقاومت الکتریکی ویژه، نفوذ تسریع شده یون کلراید (RCPT)، انتقال تسریع شده یون کلراید (RCMT) بکار برده شد. جهت بررسی ریخت شناسی مرز مشترک سنگدانه و خمیر سیمان از تصاویر ریزنگار الکترون پویشی (SEM) استفاده شد. نتایج آزمایش بر روی بتن تازه نشان داد که حضور دوده سیلیسی در مخلوط های دوجزیی و سهجزیی موجب کاهش کارایی و هوای محبوس و حضور خاکستر بادی موجب افزایش این دو میشود. افزودن دوده سیلیسی به مخلوطهای حاوی خاکستربادی ضمن افزایش مقاومت مکانیکی، موجب کاهش تخلخل و حفرات تا 18% میشود. همچنین حضور مواد پوزولانی علاوهبر افزایش کیفیت پیوند و یکنواختی مرز سنگدانه با خمیر سیمان، به طور چشمگیری بر خواص انتقال بتن تاثیر مثبت میگذارد.
https://www.jsce.ir/article_46677_c84a41ab69bdda549c4e9a571132f45c.pdf
2017-12-22
136
154
10.22065/jsce.2017.81146.1129
خاکستربادی
دوده سیلیسی
ناحیه انتقال
تخلخل
دوام
علی
صدر ممتازی
sadrmomtazi@yahoo.com
1
دانشیار، دانشکده فنی، دانشگاه گیلان، رشت، ایران
LEAD_AUTHOR
بهزاد
طهمورسی
behzad.tahmouresi@gmail.com
2
کارشناسی ارشد مهندسی سازه، دانشکده فنی، دانشگاه گیلان، رشت، ایران
AUTHOR
[1] de Sensale, G. R. (2006). Strength development of concrete with rice-husk ash. Cement and concrete composites, 28(2), 158-160.
1
[2] Khan, M. I., and Siddique, R. (2011). Utilization of silica fume in concrete: Review of durability properties. Resources, Conservation and Recycling, 57, 30-35.
2
[3] Locher, F.W., 2006. Cement: principles of production and use. Verlag Bau und Technik, 30-34.
3
[4] Leung, H. Y., Kim, J., Nadeem, A., Jaganathan, J., and Anwar, M. P. (2016). Sorptivity of self-compacting concrete containing fly ash and silica fume. Construction and Building Materials, 113, 369-375.
4
[5] Wu, K., Shi, H., Xu, L., Ye, G., and De Schutter, G. (2016). Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. Cement and Concrete Research, 79, 243-256.
5
[6] Sezer, G. İ. (2012). Compressive strength and sulfate resistance of limestone and/or silica fume mortars. Construction and Building Materials, 26(1), 613-618.
6
[7] Papadakis, V. G. (2000). Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress. Cement and concrete research, 30(2), 291-299.
7
[8] Sun, Z., Garboczi, E. J., and Shah, S. P. (2007). Modeling the elastic properties of concrete composites: Experiment, differential effective medium theory, and numerical simulation. Cement and Concrete Composites, 29(1), 22-38.
8
[9] Maruyama, I., Sasano, H., and Lin, M. (2016). Impact of aggregate properties on the development of shrinkage-induced cracking in concrete under restraint conditions. Cement and Concrete Research, 85, 82-101.
9
[10] Liao, K. Y., Chang, P. K., Peng, Y. N., and Yang, C. C. (2004). A study on characteristics of interfacial transition zone in concrete. Cement and Concrete Research, 34(6), 977-989.
10
[11] Scrivener, K. L., Crumbie, A. K., and Laugesen, P. (2004). The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. Interface Science, 12(4), 411-421.
11
[12] Wang, Y., Jin, F., and Xie, Y. (2016). Experimental Study on Effects of Casting Procedures on Compressive Strength, Water Permeability, and Interfacial Transition Zone Porosity of Rock-Filled Concrete. Journal of Materials in Civil Engineering, 28(8), 04016055.
12
[13] Wong, H. S., Zobel, M., Buenfeld, N. R., and Zimmerman, R. W. (2009). Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying. Mag. Concr. Res, 61(8), 571-589.
13
[14] Jiang, Z., Huang, Q., Xi, Y., Gu, X., and Zhang, W. (2016). Experimental study of diffusivity of the interfacial transition zone between cement paste and aggregate. Journal of Materials in Civil Engineering, 28(10), 04016109.
14
[15] Breton, D., Ollivier, J.P., Ballivy, G. and Maso, J.C., (1992). Interfaces in cementitious composites. In RILEM International Conference, Toulouse.
15
[16] Wu, K., Shi, H., Xu, L., Ye, G., and De Schutter, G. (2016). Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. Cement and Concrete Research, 79, 243-256.
16
[17] Pilvar, A., Ramezanianpour, A, A., and Rajaie, H. (2017). Experimental Assessment of Electrically Accelerated Chloride Permeability Tests for Concrete. Concrete Research, 9(2), 5-15.
17
[18] Zheng, J. J., & Zhou, X. Z. (2013). Effective medium method for predicting the chloride diffusivity in concrete with ITZ percolation effect. Construction and Building Materials, 47, 1093-1098.
18
[19] Pilvar, A., Ramezanianpour, A. A., and Rajaie, H. (2016). Comparison of Four Electrical Measurement Methods with Bulk Diffusion for Assessing the Chloride Resistance of Concretes. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 40(4), 327-336.
19
[20] AASHTO. (2007b). Standard test method for predicting chloride penetration of hydraulic cement concrete by the rapid
20
migration procedure. TP64, Washington, DC.
21
[21] NT Build. (1999). Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non steadystate migration experiments. Build492, NORDTEST, Espoo. Finland.
22
[22] Bagheri, A. R., and Zanganeh, H. (2012). Comparison of rapid tests for evaluation of chloride resistance of concretes with supplementary cementitious materials. Journal of Materials in Civil Engineering, 24(9), 1175-1182.
23
[23] Ramezanianpour, A. A., Karein, S. M. M., Vosoughi, P., Pilvar, A., Isapour, S., and Moodi, F. (2014). Effects of calcined perlite powder as a SCM on the strength and permeability of concrete. Construction and Building Materials, 66, 222-228.
24
[24] Carlsson, B., Frei, U., Köhl, M., and Möller, K. (1994). Swedish National Testing and Research Institute (No. 1994, p. 13). Report.
25
[25] Zhang, M. H., and Islam, J. (2012). Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag. Construction and Building Materials, 29, 573-580.
26
[26] Mounanga, P., Khokhar, M. I. A., El Hachem, R., and Loukili, A. (2011). Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler. Materials and Structures, 44(2), 437-453.
27
[27] Shekarchi, M., Bonakdar, A., Bakhshi, M., Mirdamadi, A., and Mobasher, B. (2010). Transport properties in metakaolin blended concrete. Construction and Building Materials, 24(11), 2217-2223.
28
[28] Vollpracht, A., Lothenbach, B., Snellings, R., & Haufe, J. (2016). The pore solution of blended cements: a review. Materials and Structures, 49(8), 3341-3367.
29
[29] Buenfeld, N. R., Glass, G. K., Hassanein, A. M., & Zhang, J. Z. (1998). Chloride transport in concrete subjected to electric field. Journal of Materials in Civil Engineering, 10(4), 220-228.
30
[30] Whittington, H. W., McCarter, J., and Forde, M. C. (1981). The conduction of electricity through concrete. Magazine of concrete research, 33(114), 48-60.
31
[31] Christensen, B. J., Coverdale, T., Olson, R. A., Ford, S. J., Garboczi, E. J., Jennings, H. M., and Mason, T. O. (1994). Impedance Spectroscopy of Hydrating Cement‐Based Materials: Measurement, Interpretation, and Application. Journal of the American Ceramic Society, 77(11), 2789-2804.
32
[32] Nokken, M. R., & Hooton, R. D. (2006). Electrical conductivity testing. Concrete international, 28(10), 58-63.
33
[33] Snyder, K. A., Feng, X., Keen, B. D., & Mason, T. O. (2003). Estimating the electrical conductivity of cement paste pore solutions from OH−, K+ and Na+ concentrations. Cement and Concrete Research, 33(6), 793-798.
34
[34] Nokken, M., Boddy, A., Wu, X., and Hooton, R. D. (2008). Effects of temperature, chemical, and mineral admixtures on the electrical conductivity of concrete. Journal of ASTM International, 5(5), 1-9.
35
ORIGINAL_ARTICLE
ارزیابی رفتار لرزه ای پل های بتنی عرشه پیوسته با بیه های مختلف با استفاده از منحنی شکنندگی
پلها از جمله ارکان اصلی خطوط حمل و نقل شهری و بین شهری میباشند. بنابراین باید طوری طراحی شوند که بعد از وقوع زلزله قابل استفاده بوده و منجر به قطع ارتباط سیستم حمل و نقل عمومی نشوند. خسارت وارد بر پلها در زلزلههای اخیر اهمیت ارزیابی لرزهای پل و تعیین سطوح خرابی آنها تحت بارهای لرزهای را آشکار نمود. از جمله عواملی که آسیب پذیری پلها در برابر زلزله را افزایش میدهد، زاویه بیه پل میباشد. پلهای دارای بیه معمولا در تقاطع بزرگراهها و یا جادههایی که به دلیل شرایط جغرافیایی امکان ساخت پلهای معمولی وجود ندارد، ساخته میشوند. هدف این مقاله ارزیابی لرزهای پلهای بتنی عرشه پیوسته دارای زاویه بیه با استفاده از معیار خرابی و تعیین احتمال خرابی پایه های پل به کمک منحنی های شکنندگی میباشد. بدین منظور سه نوع پل بتنی عرشه پیوسته دو، سه و چهار دهانه با زاویههای بیه صفر، 10، 20 و 30 درجه در نرم افزار اجزای محدود مدلسازی میشوند. سپس پاسخ لرزهای هریک از پلها تحت 10 رکورد زلزله با انجام تحلیل دینامیکی غیرخطی فزاینده (IDA) بهدست میآید. به منظور تعیین احتمال خرابی پلها از معیار خرابی ارائه شده توسط مکی و استوجانویچ استفاده شده و حدود خرابی پایههای پلها در چهار حالت خرابی کم، متوسط، زیاد و کامل تعیین میگردد. سپس منحنی شکنندگی پلها در هر یک از حالتهای خرابی، به دست آمده و احتمال خرابی پایهها در بیههای مختلف و دهانههای مختلف مقایسه میگردد. نتایج حاصل نشان میدهد که افزایش بیه موجب افزایش احتمال خرابی پل به ویژه در حالتهای خرابی زیاد و کامل میگردد.
https://www.jsce.ir/article_46870_956977fa8572887deadb7a6f08571d30.pdf
2017-12-22
155
171
10.22065/jsce.2017.77681.1085
پل بتنی
زاویه بیه
تحلیل دینامیکی غیرخطی فزاینده
معیار خرابی
منحنی شکنندگی
محمودرضا
شیراوند
m_shiravand@sbu.ac.ir
1
استادیار، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
LEAD_AUTHOR
شیما
محبوبی
sh_mahboubi@sbu.ac.ir
2
دانشجوی دکتری مهندسی زلزله، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
AUTHOR
پدرام
امیدیان
omidianpedram13@gmail.com
3
دانشجوی کارشناسی ارشد مهندسی زلزله، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایران
AUTHOR
[1] Maragakis, E.A. and Jennings, P.C. (1987). Analytical models for the rigid body motions of skew bridges. Earthquake Engineering and Structural Dynamics, 15(8), 923-944.
1
[2] Wakefield, R., Nazmy, A., and Billington, D. (1991). Analysis of seismic failure in skew RC bridge. Journal of Structural Engineering (ASCE). 117(3), 972–86.
2
[3] Meng, J.Y, and Lui, E.M. (2000). Seismic analysis and assessment of a skew highway bridge. Engineering Structure, 22(11), 1433-52.
3
[4] Mennasa, C., K.Mabsout, K. and Frederick,G. (2007). Influence of skew angle on Reinforced Concrete Slab Bridge. Journal of Bridge Engineering ( ASCE),12, 205-214.
4
[5] Dimitrakopoulos, E. G. (2011). Seismic response analysis of skew bridges with pounding deck–abutment joints. Engineering Structure, 33(3), 813–826.
5
[6] Kaviani, P., Zareian, F., and Taciroglu, E. (2012). Seismic behaviour of reinforced concrete bridges with skew-Angled Seat-Type Abutment. Engineering Structures, 45, 137- 150.
6
[7] NCHRP, Performance based seismic bridge design,(2013). A synthesis of Highway practice. National cooperative highway research program. Transportation Research Port, Washington, D.C.
7
[8] Singhal , A. and Kiremidjian, A. S.(2007) .A Method for Earthquake Motion-Damage Relationships with Application to Reinforced Concrete Frames Report NCEER-97-0008. State University of New York at Buffalo: National Center for Earthquake Engineering Research, Buffalo, NewYork.
8
[9] Erberik, M. A. and Elnashai, A. S. (2003). Seismic Vulnerability of Flat-slab Structures. Mid America Earthquake Center. Department Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.
9
[10] Jeong, S., and Elnashai, A. (2007). Probabilistic Fragility Analysis Parameterized by Fundamental Response Quantities. Engineering Structures, 29, 1238-1251.
10
[11] HAZUS-MH MR1.(2003). Multi-hazard Loss Estimation Methodology Earthquake Model Technical Manual. National Institute of Building Science.
11
[12] Caltrans.(2012). Feasibility Studies for Improving Caltrans Bridge Fragility Relationships Final Report California Department of Transportation, Report No. CA12-1775.
12
[13] Nielson, B., and DesRoches, R. (2007). Seismic Fragility Methodology for Highway Bridges Using a Component Level Approach. Earthquake Engineering and Structural Dynamics, 36 (6), 823-839.
13
[14] Padgett, J. E., and DesRoches, R. (2008). Methodology for the Development of Fragility Curves for Retrofitted Bridges. Earthquake Engineering and Structural Dynamics, 37 (8), 1157-1174.
14
[15] Roblee, C., Sahs, S., Mahan, M., Yashinsky, M., Setberg, H. and Maintenance, C.(2011). Caltrans-Aligned Limit States Discussion. (J. Dukes, K. Ramanathan, R. DesRoches, & J. Padgett, Interviewers).
15
[16] Basoz, N., and Mander, J. B.(1999). Enhancement of the Lifeline Transportation Module in HAZUS, Report No. Draft N0.7, National Institute of Building Sciences, Washington, D.C.
16
[17] Banerjee, S.,and Shinozuka, M. (2007). Nonlinear Static Procedure for Seismic Vulnerability Assessment of Bridges. Computer-Aided Civil and Infrastructure Engineering, 22, 293-305.
17
[18] Fajfar, P. (2000). A Nonlinear Analysis Method for Performance Based Seismic Design. Earthquake Spectra, 573–592.
18
[19] Kim, S. H., and Shinozuka, M. (2004). Development of fragility curves of bridges retrofitted by column jacketing, Probabilistic Engineering Mechanics, 19, 105-112.
19
[20] Mackie, K., Wong, J. and Stojadinovic , B.(2008). Integrated Probabilistic Performance-Based Evaluation of Benchmark Reinforced Concrete Bridges, Pacific Earthquake Engineering Research Center, University of Berkley California.
20
[21]Code 463,(2008).Road and Railway Bridges Seismic Resistant Design Code. Ministry of Roads and Transportation
21
[22]Code139,(2000). Standard Loads for Bridge, Office of Deputy for Strategic Supervision Bureau of Technical Execution System Deputy of Training; Research and Information Technology.
22
[23]Code 523, (2010). Guideline for Design and Practice of Base Isolation Systems in Buildings, Office of Deputy for Strategic Supervision Bureau of Technical Execution System.
23
[24]Mander, J.B., Priestley, M.J.N., and Park R. (1984). Theoretical Stress-Strain Model for Confined Concrete. Journal of Structural Engineering. ASCE, 114(3), 1804-1826.
24
[25] FEMA.-350, (2000). Recommended seismic design criteria for new steel moment-frame buildings, Prepared by SAC Joint Venture for Federal Emergency Management Agency, Washington, D.C.
25
[26] FEMA-351,(2000). Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings, prepared by the SAC Joint Venture for Federal Emergency Management Agency, Washington D.C.
26
[27]Vamvatiskos, D. and Cornell, C.A.(2002). Incremental Dynamic Analysis. Earthquake Engineering and Structural dynamics, 31, 491-514.
27
[28] Kwon, O. S., Elnashai, A. S. (2010). Fragility analysis of a highway over-crossing bridge with consideration of soil-structure interactions. Structure and Infrastructure Engineering, 6(1-2), 159-178.
28
ORIGINAL_ARTICLE
بررسی تأثیر نوع روکش میلگرد بر میزان خوردگی آن در بتن خود متراکم
در این مقاله تاثیر ضخامت بتن و انواع روکشهای حفاظتی میلگرد بر خوردگی و دوام سازههای بتن خود متراکم در حاشیه دریای عمان مورد بررسی و ارزیابی قرار گرفته است. به این منظور نمونههای بتن خود متراکم با سه نوع پوشش میلگرد از جنس روی با ضخامت40 و 60 میکرون، اپوکسی و بدون پوشش (شاهد) با ضخامت لایه بتن پوششcm 3 ،5 و 7 ساخته شده و در محیط شاهد و همچنین نواحی جزر و مد، مستغرق و ساحل بندر چابهار به مدت14ماه عمل آوری شده است. بر روی نمونههای ساخته شده، آزمایشات مختلف دوام بتن و خوردگی میلگرد در سنین مختلف انجام شد. نتایج آزمایش کاهش جرم و خوردگی میلگرد نشان دهنده عملکرد مناسب میلگرد با روکش اپوکسی و روی در مقایسه با میلگرد بدون پوشش در همه شرایط نگهداری است. نتایج همچنین نشان می دهد پوشش روی به ضخامت 40 میکرون، کاهش جرم میلگرد را نسبت به میلگردهای بدون پوشش حدود %10 کمتر نموده است. علاوه بر آن افزایش 5/1 برابری ضخامت روی باعث کاهش خوردگی در حدود %3 تا %4 می شود. استفاده از پوشش اپوکسی نیز درصد کاهش وزن میلگرد را در حدود %4 تا %8 ( بسته به ضخامت لایه بتن روی میلگرد) کاسته است. لازم به ذکر است که افزایش ضخامت لایه بتن روی میلگرد ازcm 3 به 5 و 7 به ترتیب باعث تغییر کاهش جرم از %34 به %27 و %21 شده است.
https://www.jsce.ir/article_48105_592d7e77c021524e964355985fd21a85.pdf
2017-12-22
172
185
10.22065/jsce.2017.84193.1169
بتن خود متراکم
نفوذ یون کلر
خوردگی میلگرد
روکش میلگرد
دریای عمان
مهدی
اژدری مقدم
mazhdary@eng.usb.ac.ir
1
دانشیار، دانشکده مهندسی، دانشگاه سیستان و بلوچستان، زاهدان، ایران
LEAD_AUTHOR
محمود
میری
mmiri@eng.usb.ac.ir
2
دانشیار، دانشکده مهندسی، دانشگاه سیستان و بلوچستان، زاهدان، ایران
AUTHOR
محسن
ریگی
mohsenrigi@gmail.com
3
کارشناس ارشد مهندسی سازه، دانشکده مهندسی، دانشگاه سیستان و بلوچستان، زاهدان، ایران
AUTHOR
[1] ASTM A 955-07a (2007). Standard Specification for Deformed and Plain Stainless- Steel Bars for Concrete Reinforcement. ASTM International, West Conshohocken, PA.
1
[2] Balma, J., Darwin, D., Browning, J. P., and Locke, C. E. (2005). Evaluation of Corrosion Protection Systems and Corrosion Testing Methods for Reinforcing Steel in Concrete. SM Report No. 76, The University of Kansas Center for Research, Inc., Lawrence, KS.
2
[3] Gong, L., Darwin, D., Browning, J. P., and Locke, C. E. (2006). Evaluation of Multi Corrosion Protection Systems and Stainless Steel Clad Reinforcement for Reinforced Concrete. SM Report No. 82, Lawrence, KS.
3
[4] Darwin, D., Browning, J. P., Nguyen, T. V., and Locke, C. E. (2007). Evaluation of Metallized Stainless Steel Clad Reinforcement. South Dakota Department of Transportation Report, SD2002-16-F, also SM Report No.90, University of Kansas Center for Research, Inc., Lawrence, KS, 156 pp.
4
[5] Gong, L., Darwin, D., Browning, J. P., and Locke, C. E. (2002). Evaluation of Mechanical and Corrosion Properties of MMFX Reinforcing Steel for Concrete. SM Report No. 70, The University of Kansas Center for Research, Inc., Lawrence, KS.
5
[6] Kepler, J. L., Darwin, D. and Locke, C.E. (2000). Evaluation of Corrosion Protection Methods for Reinforced Concrete Highway Structures. SM Report No. 58, University of Kansas Center for Research, Lawrence, KS, 221 pp.
6
[7] Hofsoy, A., and Gukild, I. (1969). Bond Studies on Hot-dip-galvanized Reinforcement in Concrete. ACI Journal, Proceedings Vol. 66, No. 3, pp. 174-184.
7
[8] Corderoy, D. J. H., Ford, P. R., and Herzog, H. (1977). Corrosion Behavior of Galvanized Steel in Concrete, Preprinted Papers, Annual Conference, Australasian Corrosion Association, Paper No. J2, 11 pp.
8
[9] Treadaway, K. W. J., Brown, B. L., and Cox, R. N. (1980). Durability of Galvanized Steel in Concrete. ASTM Special Technical Publication 713, Corrosion of Reinforcing Steel in Concrete, pp. 102-131.
9
[10] Hill, G. A., Spellman, D. L., and Stratfull, R. F. (1976). Laboratory Corrosion Tests of Galvanized Steel in Concrete, Transportation Research Record, No. 604, pp. 25- 37.
10
[11] Fumin Li, Yingshu Yuan, Chun-Qing Li, Corrosion propagation of prestressing steel strands in concrete subject to chloride attack, Construction and Building Materials, Vol 25 (2011), pp. 3878-3885.
11
[12] M. Ghanooni-Bagha, M.A. Shayanfar, A.A. Shirzadi-Javid, H. Ziaadiny. Corrosion-induced reduction in compressive strength of self-compacting concretes containing mineral admixtures, Construction and Building Materials, Vol 113 (2016), pp. 221-228.
12
[13] H.Y. Leung, J. Kim, A. Nadeem, Jayaprakash Jaganathan, M.P. Anwar, Sorptivity of self-compacting concrete containing fly ash and silica fume, Construction and Building Materials, Vol 113 (2016), pp. 369-375.
13
]14 [میری، محمود. سارانی، ناصر. "ارزیابی آزمایشگاهی استفاده از ترکیب پومیس و زئولیت بر خوردگی میلگرد و دوام بتن خودتراکم" ، مجله علوم و مهندسی خوردگی، شماره 2، ص 21 تا 32، سال 1393.
14
[15] ASTM C 29. Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate, American society for testing and Materials. Philadelphia.
15
ORIGINAL_ARTICLE
یادداشت فنی: شناسایی ریسک های مراحل طراحی، اجرا و ساخت در سازه های LSF
سیستم قاب سبک فولادی راکه به اختصار LSF (الاساف) مینامند، یک سیستم ساختمانی است، که برای اجرای ساختمانهای عمدتاً کوتاهمرتبه و میانمرتبه (حداکثر تا ۵ طبقه) استفاده میشود و یکی از سیستمهای ساختمانی مورد قبول مهندسان عمران (از منظر باربری ثقلی و جانبی)، در کشورهای توسعهیافته و مدرن میباشد. اگرچه این سیستم از مزایای قابل توجهی برخوردار میباشد، اما در ایران با استقبال زیادی مواجه نشدهاست که دلایلی همچون عدم تطابق با فرهنگ مردم، قیمت بالاتر، عدم وجود نیرویکار ماهر و اشکالات اجرایی برای آن ذکر میشود. در این پژوهش ابتدا سازههای الاساف معرفی خواهندشد. سپس این سازهها از مرحلهی طراحی، اجرا تا بهره برداری بررسی میگردند و ریسکهای آنها به طور دقیق شناسایی خواهدشد و در نهایت برای هر ریسک راهکار ارائه میگردد. فرآیند شناسایی ریسک از روش مصاحبه و در سطح شهر مشهدوحومه صورتگرفت. درمجموع در این پژوهش 56 پروژه شامل ساختمانهای مسکونی، ویلایی، اضافه طبقات، مدارس، اداری، تجاری، فستفود، سازههای صنعتی و دیوارهای غیرباربر الاساف مورد بررسی قرارگرفت. تمامی پروژههای مذکور در شهر مشهد مقدس اجرا شدهاند یا در آینده اجرا خواهندشد. در تمامی پروژهها با طراحان، مجریان و کارفرمایان به صورت حضوری مصاحبه صورتگرفت. با توجه به جدیدبودن این سیستم در ایران و ناشناختهبودن ریسکهای آن، این پژوهش میتواند در تصمیمگیریمدیران پروژه و مهندسان اجرایی برای انتخاب سیستم ساختمانی مناسب برای پروژههای انبوهسازی و تکسازی و همچنین اتخاذ راهکار مناسب جهت جلوگیری از این ریسکها مفید باشد.
https://www.jsce.ir/article_46852_405fab3fd5db4db64d961f4eb778409f.pdf
2017-12-22
186
200
10.22065/jsce.2017.80905.1125
سازه های ال اس اف
شناسایی ریسک
ریسکهای مرحله طراحی
ریسکهای مرحله اجرا
ریسکهای مرحله بهره-برداری
پاسخ به ریسک
علی
یگانه
ali.yeganeh@stu.um.ac.ir
1
کارشناس ارشد مدیریت ساخت، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران
AUTHOR
هاشم
شریعتمدار
shariatmadar@um.ac.ir
2
دانشیار، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران
LEAD_AUTHOR
[1] معاونت برنامه ریزی و نظارت راهبردی رئیس جمهور. (1391). آیین نامه طراحی و اجرای سازههای فولادی سرد نورد(بخش سازه). نشریه شماره612.
1
[2] Mahdavinejad, M. Hajian, M. Doroodgar A. (2011). Role of LSF technology in economic housing for urban Sustainability; case of Iran. Procedia Engineering, Vol 21, Pages (2-7).
2
]3[ کمیته ی تدوین آیین نامه ی 612 و 613 سازمان نظام فنی و اجرایی کشور، معاونت برنامه ریزی و نظارت راهبردی ریاست جمهوری. (1393). دستورالعمل طراحی و اجرای سیستم ساختمانی سبک فولادی. انتشارات دانشگاه شیراز.
3
[4] Ubejd Mujagic, J. R. Dolan, J. Daniel. Chukwuma G. Ekwueme. Fanella, David . LaBoube, Roger A. (2012). Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber. McGraw-Hill Education. ISBN 978-0-07-176792-7. Page(121-143).
4
[5] Canadian Sheet Steel Building Inistitute. (2002). Light Steel Framing Architectural Design Guide. Canadian Sheet Steel Building Inistitute. ISBN 1-895535-33-6.
5
[6] Gerami, M. Lotfi, M.Nejat R. (2015). Inelastic behavior of cold-formed braced walls under monotonic and cyclic loading. International Journal of Advanced Structural Engineering (IJASE), Vol 7, Issue 2, Pages(181-209).
6
[7] Ariyanayagam,A,D. Mahendran,M. (2014). Numerical modeling of load bearing light gauge steel frame wall systems exposed to realistic design fires. Thin-Walled Structures, Vol 8, Pages(148-170).
7
[8] Angelis,E. Serra, E. (2014). Light steel-frame walls: thermal insulation performances and thermal bridges. Energy Procedia, Vol 45, Pages(362-371).
8
[9] معاونت برنامه ریزی و نظارت راهبردی رئیس جمهور. (1392). آیین نامه طراحی و اجرای سازههای فولادی سرد نورد(بخش غیرسازه). نشریه شماره613.
9
[10] Jeynes, J. (2011). Risk Management: 10 Principles. New York: Routledge, Page(13-47).
10
[11] Ahmadi, M. Behzadian, K. Ardeshir,A.Kapelan, Z. (2015). Comprehensive risk management using fuzzy FMEA and MCDA techniques in highway construction projects. JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, Page(300-310).
11
[12] Rahman MM. Kumaraswamy MM. (2002). Risk management trends in the construction industry: moving towards joint risk management. Eng Construct Archit Manage, 9(2), Pages(131–51).
12
[13] دفتر امور مقررات ملی ساختمان. (1392) مبحث سوم مقررات ملی ساختمان حفاظت ساختمانها در برابر حریق. وزارت مسکن و شهرسازی.
13
[14] Ferguson, M,R. (2012). Drywall Professional techniques for great results. 4th Edition. Taunton Press Inc. Page (62-82).
14
[15] Ferguson, M,R. (2005). Drywall : Hanging and taping. 4th Edition. Taunton Press Inc. Page (73-102).
15
[16] دفتر امور مقررات ملی ساختمان. (1392). مبحث هجدهم مقررات ملی ساختمان عایق بندی و تنظیم صدا. وزارت مسکن و شهرسازی.
16